Xhorse Multi Prog Programmer + Exclusive Adapters + MQB48 Adapters + MQB-RH850 Adapter + GODIAG ECU GPT Boot AD and G-V ECU Cable Bundle Package Kit

Bundle Package Includes:

• Xhorse Multi Prog Pro-level ECU TCU Programmer
• Xhorse Multi-Prog Programmer Adapters: XDMP04GL VH24, XDMP05GL VH29, XDMP06GL VH30, XDMP07GL VH31
• Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters: XDNPM3GL
• Xhorse Multi Prog Adapters for EEPROM and FLASH: 9pcs/set
• Xhorse XDMPR8GL MQB-RH850/V850 Adapter
• GODIAG ECU GPT Boot AD ECU Connector
• GODIAG G-V ECU Cable

Xhorse Multi Prog Pro-level ECU TCU Programmer Highlights:

1. Fully Replace VVDI Prog:
   Multi-Prog supports factory usage mode for batch programming of chips. In this mode, functions such as batch programming, offline programming, and file offline programming can be performed easily.
   The main difference between VVDI PROG and Multi-Prog: Multi-Prog has the batch programming function, while VVDI PROG does not.
2. Free MQB48 License and BMW Bench Read ISN:
   Bind with Xhorse VVDI2/Key Tool Plus PAD account to enable MQB48 functionality on your VVDI2/Key Tool Plus PAD.
3. Read, Write, and Clone ECU
4. Read, Write, and Clone Gearbox TCU
5. Read EEPROM, ECU, MCU
6. Read and Write Bosch ECU ISN with new Bosch ECU adapter
7. Supports Checksum correction for some EDC16/EDC17 ECUs (more to come)
8. Includes free BMW ISN read function and continuous updates for NEC, MPC, Infineon, and other chips
9. Includes built-in free MQB48 license. Bind Multi-Prog and VVDI2 (full version) or Key Tool Plus to the same Xhorse app account to use MQB48 NEC35XX function.
10. Free software and firmware updates provided timely

Other Features:

• Supports Read & Write for many chips including MC9S08 series, MC68HC(9)12 series, MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series, and most EEPROM chips
• Supports chip data verify and checkblank function
• Supports data file compare function
• Free Pin code calculation service by Dump for various models
• Supports Read and Write BMW N20, N55 ECU (shows ISN directly)
• Stable Read and Write for MC9S12XE series chips (5M48H / 1N35H / 2M53J / 3M25J etc.)
• Supports renew PCF79XX remote (currently supports BMW E/F series; note: PCF79XX adapter is optional)
• Features the largest database of connection diagrams
• Reserve ports available for future updates
• Supports repair of Porsche 12V lithium battery and BYD Lithium Battery (MC9S12XET256)
• Supports EDC17/MED17 data calculation (checksum correction)
• Supports third-party automatic HEX editing scripts
• Expert mode: batch write chips (VVDI Prog only writes a single chip at a time)

Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer

Highlights:
No need to cut wire or lift pin to read MQB48/MQB49/5C dashboards.

Supported Dashboards:

• VW 4th Gen Johnson Controls 34xx series
• MQB 34XX series
• MQB-RH850 (R7F) series

Xhorse Multi-Prog Programmer Adapters XDMP04GL VH24 SOP44 TSOP48 + XDMP05GL VH29 EEPROM FLASH + XDMP06GL VH30 SOP44 + XDMP07GL VH31 TSOP48

• Supports soldering to read and write SOP44 package and TSOP48 package parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series
• Supports solder-free reading and writing TSOP48 packaged parallel FLASH chips, such as SST36VFXXX, AT49BVXXX, W19BXXX series
• Supports reading and writing common 8-pin chip data
• Supports solder-free reading and writing SOP44 packaged parallel FLASH chips, such as AM29FXXX, M29FXXX, TB28FXXX series

Xhorse MQB48 No Disassembly No Soldering 13 Full Set Adapters XDNPM3GL

• No soldering, no lifting pin, no cutting wire
• Does not damage the original instrument—easy and safe to read data
• Compatible with Multi-PROG, VVDI PROG, and Key Tool Plus

Xhorse Multi Prog Adapters for EEPROM and FLASH 9pcs/set

Package includes adapters: XDMP03GL, XDMP09GL, XDMP10GL, XDMP11GL, XDMP12GL, XDMP13GL, XDMP14GL, XDMP15GL, XDMP16GL
These soldering boards support Reading & Writing of common EEPROM and FLASH chips.

• XHORSE XDMP03GL Adapter: EEPROM & FLASH Soldering Board for common EEPROM and FLASH chips
• XHORSE XDMP09GL Adapter: TSOP56 Adapter Chip holder (Footprint: TSOP56) for FLASH operations
• XHORSE XDMP10GL Adapter: PQFP80 Adapter for AM29BDD160G (Footprint: PQFP80)
• XHORSE XDMP11GL Adapter: Supports ATMEGA103 (Footprint: TQFP64)
• XHORSE XDMP12GL Adapter: MLF28 Adapter for ATMEGA88PA (Footprint: MLF28)
• XHORSE XDMP13GL Adapter: TQFP32 Adapter for ATMEGA88PA (Footprint: TQFP32)
• XHORSE XDMP14GL Adapter: TQFP44 Adapter for ATMEGA163 (Footprint: TQFP44)
• XHORSE XDMP15GL Adapter: TQFP100 & ATMEG Adapter for ATMEGA3250 (Footprint: TQFP100)
• XHORSE XDMP16GL Adapter: SOP48 Adapter for ATMEGA3250 (Footprint: TQFP100)

GODIAG ECU GPT Boot Adapter Features:

GODIAG ECU GPT Boot AD programming adapter enables reading and writing ECU data without disassembling the ECU—using OBD2 Bench, GPT Bench, or BOOT method after disassembly. Includes a short-circuit-proof BOOT resistance board connection line to protect the ECU. Compatible with J2534 devices and PCMFlash software.

1. ECU dedicated connection terminal
2. Supports manual ignition power control
3. ECU interface cable is labeled
4. Supports ECU conversion to OBD2 mode for data read/write
5. Supports RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND
6. Supports PCMFlash automatic control of ignition power supply
7. Supports ECU opening BOOT method to read and write data
8. CANbus equipped with switch to freely select 120Ω resistor
9. Supports GPT to read and write data without disassembling the ECU
10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

GODIAG ECU GPT Boot Adapter Functions:

• Diagnostic function supports standard OBD2 protocol equipment
• Supports ECU reading and writing data, compatible with J2534 devices
• Only Scanmatik 2 PRO for PCMflash can generate GPT1, GPT2 signals required for Module 71
• Other supported devices: Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2 — support OBD2 or BOOT 53 mode for ECU data read/write

GODIAG G-V ECU Cable

GODIAG G-V ECU Cable connects Xhorse MULTI PROG with GT107 or GT107+ GPT BENCH BOOT to read and write data on VAG gearbox ECU and engine ECU, and to clone ECU.

Package Includes:

• 1pc x Multi-PROG
• 1pc x USB Cable
• 1pc x Power Adapter (15V 4A)
• 1pc x 220V Power Cord
• 1pc x VH13 Interface Adapter Board
• 1pc x VH20 Interface Adapter Board
• 1pc x VH23 Interface Adapter Board
• 1pc x MCU Adapter Multi-PROG Solder Cable
• 1pc x MCU DB15 Adapter Cable
• 1pc x ECU Adapter Multi-PROG Solder Cable
• 1pc x ECU DB15 Adapter Cable
• 1pc x Multi-PROG OBD Cable
• 1pc x USB WIFI Network Card
• 1pc x Product Manual
• 1pc x Certificate Of Conformity
• 43pcs x ECU Cable Plugs
• 13pcs x Xhorse MQB48 adapters XDNPM3GL
• 1pc x Xhorse XDMPR8GL MQB-RH850/V850 Adapter for Xhorse MULTI-PROG Pro-level Programmer
• 1pc x XDMP03GL
• 1pc x XDMP09GL
• 1pc x XDMP10GL
• 1pc x XDMP11GL
• 1pc x XDMP12GL
• 1pc x XDMP13GL
• 1pc x XDMP14GL
• 1pc x XDMP15GL
• 1pc x XDMP16GL
• 1pc x Xhorse XDMP04GL VH24
• 1pc x Xhorse XDMP05GL VH29
• 1pc x Xhorse XDMP06GL VH30
• 1pc x Xhorse XDMP07GL VH31
• 1pc x GODIAG ECU GPT Boot AD Programming Adapter