Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB

New OPCOM V1.7 Firmware 2010V Software Feature:

1. OPCOM is a special PC-based diagnostic interface especially for OPEL.
2. Software Version:2010/2014 Firmware Version: 1.7
3. DO NOT update opcom online; otherwise, the device would be damaged!

1. It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program allows users to read out and clear fault codes, shows you live data and perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
4. Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
5. Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer, and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
6. Fault codes will be shown with all information available:

1. Full status information (Present, Not present, Intermittent)
2. Users can print out, save, or copy the fault codes to any other application.
   From the fault codes window, users can go directly to the measuring blocks window.
3. The program shows measuring block information on many control module, users can choose anything from the list on your own.
4. The program is capable of showing 8 measuring block parameter simultaneously.

• PIN6-PIN14
• PIN3-PIN11
• PIN1
• HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
• MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
• SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

• 1pc x OP COM Interface
• 1pc x USB Cable
• 1pc x Software and Drivers CD