The launch X-431 PRO Elite is an 8-inch smart car diagnostic device powered by Android 10.0. It features a 2.0GHz quad-core high-efficiency processor, 4GB RAM + 64GB ROM of large storage capacity, and a high-endurance battery for faster, more stable, and longer-lasting operation.

Newest Released Functions of launch X-431 PRO ELITE

1. Supports CAN FD and DoIP new protocols
2. 8-inch LED touchscreen, Android 10.0, 2.0GHz 4-core processor, 4GB RAM + 64GB ROM large storage
3. 6000mAh battery for high endurance, faster, more stable, and long-lasting operation
4. OE-Level professional full system car diagnosis
5. Full bi-directional control (Active Test)
6. Supports guided functions for VW and Audi
7. Supports 31+ reset services, with more being added regularly
8. 2 years of free updates; device remains fully functional after expiration without being locked
9. 24 languages available for seamless user experience
10. Supports Auto VIN Scan, Intelligent Diagnostics, Remote Diagnostics, and Diagnostic Feedback
11. Compatible with X-PROG 3 for IMMO programming
12. Compatible with TSGUN and RF-Sensor to activate, program, learn, and detect tire pressure
13. Compatible with BST360, VSP100, ADAS, Wi-Fi Printer, and more. Supports common special functions across most models, including maintenance light reset, throttle valve matching, steering angle reset, brake pad reset, tire pressure reset, ABS bleeding, battery matching, gear information learning, fuel injector coding, DPF regeneration, IMMO matching, and IMMO programming.

Important Notes

Global Version: For customers outside the UK and EU countries—no IP restrictions apply.
EU/UK Version: Has IP limitations and works only within EU/UK regions. Customers in the UK or EU should select the UK/EU version of the launch x431 PRO ELITE.

Limitations:
The launch X-431 PRO Elite does not support online programming.
It supports USB connection only. For a wireless scanner with similar functionality, consider the CRP919 BT (USB/Bluetooth).

2023 Added Extended Functions

• ADAS Calibration: Compatible with launch x431 ADAS Mobile to calibrate advanced driver-assistance systems such as ACC and AEB. Supports calibration of camera-based and radar-based systems including vehicle cameras, LKA, ACC, LDW, and AVM systems. ADAS enhances safety by warning drivers of potential hazards, assisting in maintaining control, and reducing accident severity.
• FCA Vehicles (2017 and later) with Secure Gateway Module (SGW): Register with AutoAuth to enable communication with the FCA SGW Authentication System, bypassing the SGM for diagnostics and bi-directional tests without a bypass cable.
• VAG Guided Functions (Audi, Volkswagen, Skoda, Seat, etc.): Step-by-step on-screen instructions guide users through diagnostics—even beginners can perform complex tasks independently. No extra cost to use these guided functions.
• Hidden Features Activation: Unlock or disable built-in vehicle features such as 3-time flasher setting, auto lock/unlock, one-touch signal flickers, disabling buzzer sounds, needle sweep, rear-view mirror folding, daytime running light disable, seat belt alarm beep disable, and removal of maximum speed limiter.
• Programmable Module Installation (PMI): Supports PMI for Ford, Lincoln, Mazda, and others when replacing or initializing modules (e.g., ECU). No J2534 device or subscription required.
• Power Balance Test: Identifies hidden engine issues like misfires, power loss, or rough running by evaluating cylinder performance—often missed by other tests. Best used alongside compression and leakage tests for precise diagnosis.
• Key Programming: Add, delete, and reprogram keys; rewrite smart keys; replace smart key ECU or knob ignition; relearn keys.
• Actuator Tests (Functional Tests): Includes hundreds of tests varying by vehicle: front/rear ACM solenoid control, fuel pump cycling, A/C clutch cycling, left clutch electromagnetic coil test, acceleration device test, oil pressure control, dynamic camera aiming, vehicle level calibration, brake vacuum pump test, inlet/outlet valve tests, open brakes test, parking brake motors, wheel speed sensor supply, and PARKING BRAKE tests.

Bi-directional Control (Active Test)

Actuate solenoids and actuators directly to test component functionality without using vehicle controls—sending commands to systems to verify operational status.

OE-Level Full System Diagnosis

As an OE-level automotive diagnostic tool, the LAUNCH x431 PRO Elite accesses most vehicle ECUs to read and clear codes, retrieve live data, view freeze frames, obtain ECU information, and perform active tests, adaptations, matching, and warning light resets across all major vehicle systems.

Supported systems include: ABS, engine, SAS, TPMS, IMMO, Battery, Oil Service, SRS, DPF, Air Conditioning, Transmission, and more.

Powerful Full-System Diagnostic Capabilities

1. engine System: Monitors ignition, fuel injection, air-fuel ratio, and emissions to boost performance, save fuel, and reduce exhaust output.
2. Transmission: Diagnoses slipping or hard shifting issues via fault codes and live data to ensure safe driving.
3. ABS System: Begins with visual inspection, then retrieves ABS codes to pinpoint faults accurately.
4. SRS System: Tests impact sensors, control modules, and airbags by checking all electronic parameters for proper function.
5. Brake System: Diagnoses mushy pedals, unusual odors, or noises—critical for safe vehicle control.
6. Emission System: Detects issues caused by age or poor fuel quality to minimize harmful emissions and avoid fines.
7. Fuel System: Investigates no-start conditions or illuminated “Check Engine” lights; regular checks ensure optimal performance and low emissions.
8. Transmission (reiterated for emphasis): Essential for overall vehicle performance when experiencing shift problems.
9. Wiper System: Addresses chattering or streaking that impairs visibility and increases accident risk.
10. Light System: Diagnoses rapid blinking or dimming lights and many other lighting issues.

32+ Common Repair & Maintenance Services (Continuously Expanding)

1. Oil Lamp Reset: Resets oil life monitoring after oil and filter changes.
2. Injector Coding: Programs new injector IDs after replacement.
3. EPB Reset: Deactivates/activates brake control, assists with fluid management, and operates brake pads.
4. SAS Reset: Calibrates steering angle sensor and clears stored data.
5. Battery Service (BAT): Evaluates charge state, monitors current, and registers battery replacements.
6. ABS Bleeding: Removes air from ABS to restore brake sensitivity.
7. Throttle Adaptation: Resets ECU-learned throttle values to factory defaults.
8. TPMS Service: Required after tire maintenance to reset pressure monitoring.
9. Gear Learning: Performs relearning after ECU, crankshaft sensor, or flywheel replacement.
10. IMMO (Key Programming): Disables lost keys and adds new ones. Note: Only works on select vehicles with simpler systems. Contact us with your vehicle year and model to confirm compatibility.

WARM NOTICE: The LAUNCH x431 V+ 4.0 2023 scan tool may not support IMMO/key programming on certain vehicles. If purchasing primarily for this function, please contact us beforehand to verify compatibility.

11. AFS Headlamp Reset: Initializes adaptive headlamp system.
12. Sunroof Initialization: Required after control unit issues or replacement.
13. Suspension Reset: Calibrates body height sensor for leveling.
14. RESET ACINI
15. RESET ADBLUE
16. RESET AIRFUEL
17. RESET BOX
18. RESET COOLANT
19. RESET DPF
20. RESET EGR
21. RESET ENGPBM
22. RESET GPF
23. RESET HVOLBAT
24. RESET ICCS
25. RESET LANGUAGE
26. RESET NOXSENSOR
27. RESET PROG
28. RESET SEAT
29. RESET STOPSTART
30. RESET TRANSPORT
31. RESET TYRE
32. RESET WINDOW

Covers 99% of Global Vehicles – Over 100,000 Models Supported

Package Contents

• 1 × Tablet
• 1 × AC adapter
• 1 × Main cable
• 1 × USB cable
• 1 × UK plug
• 1 × US plug
• 1 × EU plug
• 1 × User manual
• 1 × Quick guide
• 1 × Packing list
• 1 × Password bar