CG FC200 ECU Programmer Full Version with New Adapters Set

Key Features and Highlights

1. Protect Original Car Parts

More than 98% of ECUs support BENCH mode and OBD mode, eliminating the need to open the cover or punch holes—preserving your vehicle’s original components.

2. Intelligent Recognition

The “identification” function helps users diagnose whether the ECU module is communicating properly and verify correct wiring. If the ECU is undamaged and correctly wired, successful recognition allows reading of chip information, hardware details, and firmware data.

3. Module Clone

Supports ECU data reading and writing along with module cloning—no synchronization matching or online programming required. Features include data sub-regional burning and automatic verification for maximum chip and module protection.

4. ISN Read and Write

Enables acquisition of engine control unit (ECU) ISN codes across all BMW series (including Mini), simplifying key matching and anti-theft system maintenance.

5. VIN Modification

Resolves issues such as duplicate VINs or VIN mismatches, streamlining vehicle maintenance and registration processes.

6. Data Processing Capabilities

• Supports engine computer data analysis and modification for Audi, Seat, Skoda, and Volkswagen models.
• Allows disabling of the Bosch MED/EDC17 series engine computer anti-theft system.
• Includes TPROT off functionality for:
  • Bosch VAG MEDC17 series
  • BMW/Mini MEVD17/EDC17 series
  • Hyundai/Kia EDC17/MED(G)17 series

7. Broad ECU Compatibility

The FC200 supports not only BMW ECUs but also over 3,000 additional ECUs—comparable to tools like KTAG, Kess, and Dimsport.

Check the FC200 Support ECU List for full compatibility details.

8. Multi-Language Support

Available in English, French, and Simplified Chinese.
Spanish, Polish, Turkish, and Traditional Chinese are available for an additional fee of $130.

9. Full Version with All Licenses Activated

Includes one year of free software updates. After the first year, the FC200 Update Service costs $200 per year.

10. New Adapters Set Included – No Disassembly Required

Package includes the following adapters:

• 6HP & 8HP
• MSV90
• N55
• N20
• B48/B58
• B38
• 271KE Adapter
• 271DE Adapter

With this adapter set, you no longer need the older B48/B58 cable.

11. MPC5XX Adapter Included

Supports Bosch MPC5xx platform ECUs, including:

• MED9.1, MED9.5, MED9.5.10, ME9.0
• EDC16CP31, EDC16CP35, EDC16C2, EDC16C8

FC200 Latest Update Information

CG FC200 V1.2.0.0 Registered Version NEW (2024.05.11)

• Added CONTINENTAL type ECUs: SID209, SIM2K-341 (ECU)
• Optimized verification function for BOSCH/CONTINENTAL/KEFICO/DELPHI TC17 ECUs
• MED17_China: added new password reading function
• Added BOSCH TC17 ECUs:
  • MINI: MED17.2.2
  • Ford/MB: DCU17PC01
  • Hyundai: DCU24
  • Peugeot: ME17.9.53
  • BOBCAT: EDC17C87
  • McLaren: ME17.8.33
• Added Renesas chip ECUs:
  • Honda: KEIHIN 37820-xxx-xxx SH7058, DELPHI DCM3.7AP_CHINA SH72544
  • FAW: DENSO TD112700-xxxx SH72530
  • Hyundai: DENSO 33910-05005 – added DFlash reading capability
• Added Delphi TC2xx ECUs: DCM7.1A/DCM7.1B

CG FC200 V1.1.9.0 Registered Version (2024.03.23)

CG FC200 Software Free Download

• Added BOSCH ST10 ECUs with verification support for:
  • Abarth: ME7.9.10
  • Alfa Romeo: ME7.9.10, MED7.1.1
  • Audi: ME7.5.30, ME7.5, MED7.5.10
  • Bentley: ME7.1.1
  • BMW: ME7.2
  • Chery: ME7.9.7, M7.9.7, ME7.9.71
  • Chrysler: ME2.8.1
  • Peugeot Citroen: M7.4.4, ME7.4.4, ME7.4.9, ME7.4.6, VALEO_J34P
  • Ferrari: ME7.1.1
  • Fiat: ME7.9.9, MED7.6.2, ME7.9.10, MED7.1.1, VALEO_J34P
  • Geely: M7.9.7
  • Honda: ME7.9.7, ME7.9.3
  • Hyundai Kia: M7.9.7, ME7.9
  • Lancia: MED7.6.2, MED7.1.1, ME7.9.10
  • Maserati: ME7.1.1
  • Mercedes: ME2.8, ME2.8.1
  • Mitsubishi: ME7.7.1
  • Opel: ME7.6.4
  • Polaris: M7.9.7
  • Porsche: ME7.5, ME7.8.1, ME7.2, ME7.8
  • SAIC: ME7.8.8
  • Volkswagen Seat Skoda: MED7.5.10, ME7.5.30, ME7.5
  • Toyota: ME7.9.5
  • Volvo: ME7.0, ME7.0.1
• Added DENSO ECUs:
  • Mazda: DENSO R2AA/R2AB/R2AC/R2AJ/R2AK/R2AW/R2AX/R2BG/R2BP/R2BR/R2BS, DENSO RF7x/RF8x
  • Hyundai/Kia: DENSO 33910-05005
  • Suzuki: DENSO 33920-67P0
• Other new ECUs:
  • Chevrolet/Holden/Opel: DELPHI DCM3.7AP
  • Suzuki: ME17.9.64
  • Ford: MG1CS017
• Added a new button for “Vehicle Fault Code Support List” on the main interface.

Bug Fixes

• Fixed EEPROM reading errors in ME7.5.20/ME7.5.10/ME7.5 and other ECUs.
• Resolved program error when writing after PFlash verification on certain ECUs like DQ380/1.
• Fixed VIN modification failures in newer Mercedes-Benz MED17.7.3/ME17.7.7 and Volkswagen MED17.5.25/MED17.5.5 models.

V1.1.8.0 Registered Version (2024.02.01)

• Added Hyundai/Kia TCU: TC60.x.x
• M7/ME7/M17 ST10F725/6 ECU adds the function of turning off the anti-theft system
• GM E80 adds BOOT mode
• BMW's new ECUs: MEVD17.8.4, ME17.2.42
• Peugeot/Citroen MED17.4.2 TC1767 new platform mode
• EDC17C84 adds the function of modifying VIN

Bug Fixes

• Fix the problem that some MD1CS089 cannot start the car after reading and writing data.
• Fix the problem of Mercedes-Benz 9GT TCU cloning failure
• Fix the problem of failure to write PFlash in GM 6T/6L gearbox
• Fix GPEC2A and other unrecognized problems
• Fix the problem that some ECUs such as EDC16C1 and EDC16CP35 fail to write to ExtFlash.
• Volkswagen MED9.1 MPC563/4 supplementary wiring diagram
• Hyundai/Kia EDC17CP14 corrected reading password wiring diagram
• Volkswagen MED17.5 platform mode supplements other wiring diagrams
• IVECO EDC17C69 supplementary wiring diagram

Functions of Each Adapter

1. MSV90 Adapter

This adapter supports ISN reading and writing and data backup and recovery of BMW MSV90

2. N20 Adapter

This adapter supports ISN reading and writing, VIN modification and data reading and writing functions of the N20 and N13 of the F series chassis of BMW

3. B48/B58 Adapter

This adapter supports ISN reading and data reading and writing functions of BMW models: MG1CS003, MG1CS024 and MG1CS201.

4. 271KE Adapter & 271DE Adapter

These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE

5. 6HP & 8HP Adapter

The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.

FC200-MPC5XX-P02-M230102 Adapter for BOSCH MPC5xx Read/Write Data on Bench

Description

CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series clone without opening cover.

Product Functions

Supported ECU Models: ME9.0, MED9.1, MED9.5.10, EDC16C2, EDC16CB, EDC16CP31, EDC16CP35. More models are being upgraded.

Product Features

• Adaptation without disassembly
• Stable and safe
• Function extension
• Data loss prevention
• Real-time monitoring
• Solid connection

Package List

• 1pc x CGDI FC200 Host
• 1pc x OBD Cable
• 1pc x Jumper
• 1pc x USB Cable
• 6pcs x G-type Adapter Cable
• 3pcs x F-type Adapter Cable
• 6pcs x E-type Adapter Cable
• 6pcs x D-type Adapter Cable
• 6pcs x C-type Adapter Cable
• 6pcs x B-type Adapter Cable

FC200 Adapter Set
including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adapter, 271DE Adapter

1pc x CG FC200-MPC5XX-P02-M230102 Adapter