opel diagnostic tool
2010 /2014 OPCOM firmware 1.70 diagnostic tool works perfect for Opel cars diagnostics, including new cars with CAN-BUS, such as Vectra-C, Astra-H,Zafira-B.
Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB is a one of our opel diagnostic tool Tools, you can buy Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB from chinaobd2.com.
Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3
images of Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB
Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB
New OPCOM V1.7 Firmware 2010V Software Feature:
- OPCOM is a special PC-based diagnostic interface especially for OPEL.
- Software Version:2010/2014 Firmware Version: 1.7
- DO NOT update opcom online; otherwise, the device would be damaged!
New OPCOM V1.70 Firmware 2010/2014V Software Function:
- It covers almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
- The program allows users to read out and clear fault codes, shows you live data and perform output test.
- The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module,
- Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
- Since Opel cars adopt many PINs in the OBD connector, the diagnostic interface works as a multiplexer, and users need select the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- Fault codes will be shown with all information available:
Full fault code text description:
- Full status information (Present, Not present, Intermittent)
- Users can print out, save, or copy the fault codes to any other application.
From the fault codes window, users can go directly to the measuring blocks window. - The program shows measuring block information on many control module, users can choose anything from the list on your own.
- The program is capable of showing 8 measuring block parameter simultaneously.
The sample rate is depends mostly on the communication protocol.
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
For example, the older system like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while the newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
Users can also run output tests on many controllers.
- PIN6-PIN14
- PIN3-PIN11
- PIN1
- HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
- MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
- SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package includes:
- 1pc x OP COM Interface
- 1pc x USB Cable
- 1pc x Software and Drivers CD
Go to Buy: Best Quality Opcom OP-Com Firmware V1.7 2010 /2014V Can OBD2 for OPEL with Single Layer PCB