Mileage Programmer

Original Yanhua Digimaster 3 Odometer Correction Master No Token Limitation

Item No. COBD2374 1) It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc2) Original device, can update online3) New version can support newer cars

Mileage Correction Tool Digimaster 18

Item No. COBD21477 DigiMaster 18 is a programming machine with multifunction which can connect computer through the USB access. Apart from the ordinary functions, there are special models function.

Tacho Pro 2008 July Version Universal Dash Programmer

Item No. COBD23440 1. It is the most sold programming-device for digital speedometers worldwide. 2.The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation.3. Multi language support

NEC Programmer

Item No. COBD232 This device is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen,Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below) that allows you to modify/reprogram your car’s computer or correct the odometer reading.

Promotion V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit

Item No. COBD23576 Digiprog3 is a cost-effective mileage correction tool.1. Supports multi-language and full range or vehicle. 2. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.88.3. Update by E-mail.

Tachopro 2.0V VW AUDI Odometer Correction Mileage Tool Support VDO Motometer or Magneti Dashboard

Item No. COBD240 Tachopro 2.0V VW AUDI Odometer Correction Mileage Tool :1. The TachoPro software might not work on PC`s that are faster than 233 MHZ. 2. Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside.3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell

USA PROG Full Package Original Can Update Online

Item No. COBD22449 USA PROG Full package is the best odometer correction tool for USA cars. Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; USA adapter, CMM adapter,OBD cables are in package. Including VW/AUDI 2007+

OBD2 Odometer Correct And Immobiliser Key Programming Tool For Ford

Item No. COBD23550 Ford OBD2 Tool is a newly released lightweight and friendly OBD device. It is used to mainly perform Ford instrument calibration and immobilizer key matching.

KM TOOL Via Obd2 For FIAT

Item No. COBD297 KM Program TOOL via OBD2 for FIAT is a car mileage program cable and connector.This Fiat km tool can not only do Fiat cars, it also can do Peugeot, Citroen, Lancia, Quattro.

Super VAG K+CAN Plus 2.0

Item No. COBD2413 This product can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars

KM TOOL EDC V1.5 For Opel Read/Write KM Models 1998-2009 Can-bus System

Item No. COBD2136 1) Support engine controllers EDC16 in OPEL cars. 2) Can suppports canbus system only

CAS3/912X/9S12X IN Circuit Programmer

Item No. COBD2171 1.you don't need to remove the micro from the board.You only connect 7 pins will be ok.
2.It connect to PC by USB.
3.Support MC912D60 MC912DX128 MC9S12DX64 MC9S12DX128 MC9S12DX256 MC9S12XDX512

Tacho Universal V2008.01 Update& Repair Kit Never Locking Again

Item No. COBD2347 Tacho Universal V2008.01 Update& Repair Kit Never Locking Again repair kit can repair the following troubles: Screen display: Diga update Screen display: RESET. No display after powered on .No vehicle list, screen display black strip .Frequently Halting Screen display both the following: update handheld The machine cannot read EEPROM

VW Audi KM Tool V2.5 With Multi languages

Item No. COBD2364 KM TOOL V2.5 For VW AUDI is a KM adjust tool.Works for VW cars such as Golf 5 Passat EOS Caddy Tiguan and Touran. Works for AUDI A3 A8 R8 and TT. It is multi-language.

Xhorse Micronas Multi languages OBD TOOL (CDC32XX) V1.8.2 for Volkswagen

Item No. COBD2370 Micronas OBD TOOL (CDC32XX) V1.8.2 for Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic. It can do odometer correction, PIN code read, and EEPROM read/write. It is a multi-function and reasonable obd2 product.

CAS BDM Programmer for Digimaster 3/ CKM100/ CKM200 Read And Program For BMW CAS 1/2/3/3+/4 And BENZ Series EIS CPU Data

Item No. COBD2730 CAS BDM Programmer used to read and program BMW CAS 1/2/3/3+/4, and BENZ series EIS CPU data. CAS BDM Programmer works together with Digimaster 3, CKM100 or CKM200.

Original Digimaster III Odometer Correction Master With 980 Tokens

Item No. COBD21348 Digimaster 3 also is called Digimaster III with 1080 Tokens or shortly D3 is new developed odometer correction master.1)It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz &BMW etc2) Language: English3) Read BMW CAS1/ 2/ 3 data by CAN interface.

OBDSTAR X-100 PRO X100 PRO D Type For Odometer and OBD Software Function

Item No. COBD23241 X100 PRO D Type support Odometer ajustment (Via obd)2) Support language: English, Chinese3) Free Update Online4) With full and strong database for the most important vehicle makes;

Tacho Pro Plus V2008 Dashboard Programming Tool July Version Main Unit

Item No. COBD23577 Tacho Pro Plus V2008 July Version Main Unit on Sale.This is the main unit of tacho pro u2008 dashboard programming tool July version.Used for those customer whose main unit has been damaged or lost.

USA PROG Standard Package (Need Purchase Software Seperately)

Item No. COBD23581 USA PROG STANDARD PACKAGE is a odometer correction tool for almost all USA cars. Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; USA adapter, CMM adapter,OBD cables are in package.

Tacho Programmer Tachograph Programmer CD400 Blue Color

Item No. COBD25162 Tachograph programmer (Tacho) CD400 blue is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer.