1. Built-in Database, can easily find key information
4. 3-Axis Precision Ball Screw Transmission
5. Cross Rail
6. All Aluminum Machine Body
8. Standardly include clamps M1/M2, M3 needs to buy alone
9. Support Sided/Track/Dimple/Tibbe keys
10. Some Dimple/Tibbe keys need optional clamps
Condor XC-MINI Driver File Free DownloadiKeycutter CONDOR XC-MINI Master V4.0.2 (2017.11.16)
------------------------------------------+ Add universal key decode function
+ Add M2-D function
+ Add motor sensor testing function
* Modify probe/cutter detection
* Fix machine may crash error problem
* Fix HU49 key decode error
* Fix Fix HU66 cutting speed issue
iKeycutter CONDOR XC-MINI Master V4.0.1 (2017.06.16)------------------------------------------
+Add universal key decode function
+Add M2-D function
+Add motor sensor testing function
*Modify probe/cutter detection
*Fix machine may crash error problem
*Fix HU49 key decode error
*Fix HU66 cutting speed issue
*Fix BW6 cutting error
*Fix TBE1 cutting error
Notes:
1.New update for both SN KM02/KM03 machines
2.New function:Main Interface-Key Duplication-Universal Type
3.Universal Type support decode/cutting parts of home & vehicle keys
4.Please keep the whole key clean and conductivity good(ensure without dust/oil)
5.For one side key(thickness of whole key usually 1.5mm or 2.00mm) please add a shim / business under the key,ensure the whole key thickness should more than 3mm
iKeycutter CONDOR XC-MINI Master Update Steps:
1. Connect iKeycutter CONDOR XC-MINI Master to the PC with a USB cable.
2. Turn on the iKeycutter CONDOR XC-MINI Master.
3. Click "Update online" button to start update.
4. The screen will appear "Updating" prompt.
5. Wait for the update completed.
Notice:
1: Do NOT turn off PC or unplug USB cable duing updating.
2: Data downloading and firmware upgrading may take a while, please be patient.
3: If the update fails, turn off anti-virus software and then try again.
How to Update Condor XC-Mini to V4.0.2 by Xhorse update kitHow to Operate iKeycutter Condor XC-Mini?Note:Check the usermanual to get detail operating instruction with pictures.How to use “Key Database”User need to supply the key code, then can cutting the key.
1) Enter the Main interface, Click on Key Database
2) Choose the Car Brand, Click on Confirm
3) ①Enter the key code ②Click on Confirm
4) Enter the key serial code Click on Confirm
5) The Bitting Code will be found in the database, and it will be shown on the screen,Click on Cut to start.
How to use “Key Duplication”?User need to supply the Car type and Year of the production
1) Enter the Main interface, Click on Key Duplication
2) ①Choose the Car Maker ②Click on Confirm
3) Choose Car Type, Click on Confirm
4) Choose the Car type and Year of the production, Click on Confirm.
5) Put the original Key in the properly position of the clamp display on the screen, then Click on Decode Key.
6) Verify bit code and modify bit code if needed, Click on Cut to start
How to use “Cut by Bitting”?There are 2 methods to get the key using Cut by Bitting
Method 1: without the origin key using Cut by Bitting
1) Enter the Main interface, Click on Cut by Bitting
2) Choose the Blank Key, Click on Confirm
3) ①Select Key Type ②Click on Confirm
4) ①Put the Blank Key in the properly position of the clamp display on the screen ②Enter bitting and verify, then click on Cut to start
Method 2: existing the origin key using Cut by Bitting
1) Choose the Blank Key, Click on Confirm
2) Select Key Type, Click on Confirm
3) Click on Decode Key, the found bitting will display on the screen
4) Verify bitting and modify bitting if needed, Click on Cut to start。
How to use “Find Bitting”?Parts of the car are missing bitting on door lock/trunk lock/ignition lock, enter unknown bitting as "?"
1) Enter the Main interface, Click on Find Bitting
2) ①Select Car Maker ②Click on Confirm
3) ①Select the Blank Key ②Click on Confirm
4) ①Select Key Type ②Click on Confirm
5) ①Enter known bitting ②Enter unknown bitting as "?" ③Click on Find Bitting Code
6) Possible key bitting will be listed. Note that system has sorted the codes by the most economical way in order to save blank keys. For example, the bitting under " First key" only needs three blank keys, the bitting under "Second Key" need another three blank keys, then the "third Key"...
Condor XC-Mini Feedback and Review:
1. Cut New
GM, Coverlet, HU100, PSA
Peugeot,
Citroen VAT2 key, XC-MINI makes job easier
2.Do Toyota TOY43 all key
lost, save you a lot of time
3.Cut Suzuki,
Mazda (key tooth in ignition lock more than door lock) all key
lost, simply by enter the key code
4.Do
Hyundai, Kia,
Peugeot, and
Citroen all key
lost, directly program keys
5. HU101 works fine, HU92 works fine.
6.HU66 OK, have to do two passes on each side to get the key to work, same with hu100.
7. Fix the problem that other
Key Cutting Machines cut domestic
Honda key not accurately
8.Clio 2 series with m1 clamp all is ok perfect
9. Panda MJ year 2005 cut key ok
10. Support “Define key tool” in a short time, for example: define 2015 corolla key
Guidence pic to show you how to connect the Condor XC-MINI in office
Guidence pic to show you how to connect the Condor XC-MINI with car ( this package do not contains inverter, you have to buy it separately, and the power of the inverter must above 300W)