iSmart800 Pro

2023 VIDENT iSmart800 Pro Automotive Diagnostic & Analysis Scanner with 40+ Maintenance Functions Multi-Language
iSmart800Pro is Vident new Android based scan tool featured with intuitive user interface, sophisticated diagnosis, wide vehicle coverage, advanced graphing, Bi-directional component tests, component calibration. It utilizes a 7 inch high resolution IPS LCD touch screen (1024 x 600), a secure, solid-state 72GB hard drive and a Cortex processor that delivers boot-up in less than 30 seconds, the multitask-capable Android 7.1.2 Operating System to offer you the best intuitive user interface and user-definable configuration. With an unusual combination of sophistication and simple operation, iSmart800Pro is suited to any tech—from rookies to seasoned diagnostic specialists.

🏆ALL Systems Diagnostic: iSmart800Pro full system diagnostics and provides a complete scan of engine, AT, ABS, TPMS, fuel, BCM diagnostic data so that you can quickly capture all fault codes and fix them to optimize performance.

🏆Bi-Directional Controls: iSmart800Pro Active Test/Bi-directional Control is widely used on car subsystems to help you check if car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...

🏆Powerful Key Programming Capabilities: Read Pin Codes + Add New Keys (Fob/Smart)+ Remote Learning + Key Matching, etc, works on most vehicle brands, such as: for Honda, for FORD, for GM, for Nissan, for Toyota, etc.

🏆40+ Special Functions: Comprehensive special functions like ABS Bleed, Injector Coding, Power Balance, Key Programming, Fuel Trim Reset, Oil Reset, EPB, SAS, DPF, BMS, Throttle, Gearbox Match, Suspension, Start/Stop Reset, Electronic Pump Activation, and etc.

🏆Support CAN FD Protocol: iSmart800Pro with Latest Hardware, Work on More CAN FD Protocol Vehicles (For GM Vehicles After 2020), CAN FD Adapter NO Needs Buy Separately.

🏆Auto Vin & Auto Scan: Automatically retrieve the vehicle identification number for comprehensive all available systems scan for quick diagnostics.

🏆3 Years Free Updates: Updates are free for 3 years, after which you can continue to use the full functionality, features and vehicle coverage of the latest updated software. After 3 years the renewal fee is $120 a year.

🏆88+ Vehicle Brands,10000+ Cars: The vehicle coverage is extensive, covering more than 88 brands and 10,000 vehicles, and the software for new models is still under development.

🏆iSmart800Pro Support 15 Kinds of Language: English, Spanish, French, German, Portuguese, Swedish, Chinese, Traditional Chinese, Russian, Japanese, Korean, Thailand, Slovakia, Hungarian, Italian.

iSmart800 Pro Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems, such as ABS, SRS, engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System etc.

1. For engine System: Diagnostic tool iSmart800 Pro can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.

2. For Transmission: It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.

3. For ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.

4. For SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status.

More...

Full Bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as EVAP Tests, Compression Test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, etc.

Note: Available active tests vary by vehicle system. Please send the specific car model to the seller to check the compatibility before purchasing.

1. Oil/Service/Maintenance Light Reset: Close the oil service light and reset service mileage & service interval after replacing the engine oil.

2. EPB Reset: Reset the new electronic parking brake for braking wheels safely again.

3. Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

4. TPMS Reset: Relearn TPMS sensors so that new sensors can be recognized by ECU.

5. ABS Bleeding: Get a firm brake pad after air exhaustion.

6. IMMObilizer:Allows to disable a lost vehicle key to protect the vehicle from being stolen and add the new key.

7. DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

8. Injector Coding: Code the new injectors after replacement for accurate fuel injecting control and improve fuel efficiency.

9. SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.

10. BMS Reset: Register the newly replaced car battery into the ECU.

Other Funtion Include: A/C Learn, AJUSTE, AT Adaption, Adblue, Airbag, BRT, Change Language, Change Tire, Clutch Adaptation, Coolant, RGR Reset, EVAP Test, GPF, Gear Box, Gear Learn, Head Light, High Voltage Battery, Motor Angle, NOx Reset, Odo-*-meter, Power Balance, Prime Fuel Pump, Seat Match, Steering Angle, Stopstart, Sun Roof, Suspension, TCM 0il Reset, Transport, Turbo, Windows Door.

Note: Before Purchasing, Send Specific Models and Functions to ask the seller whether they support it.

The IMMO service can disable a lost vehicle key and program the replacement key fob. One or more replacement key fobs can be programmed. like programming new key fobs, Read PIN code/pin code calculation,Check number of keys, Generate key, Add key, All key lost.

1. Read PIN code/pin code calculation

2. Check number of keys

3. Generate dealer key

4. All key lost

5. Add key

Note: Not all cars support key programming. Please send the specific car model to the seller to check the compatibility before purchasing.

1. Read Trouble Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Clear Trouble Codes: Turns off Check Engine Light (MIL), clears codes and resets monitors

3. Live Data: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

4. Read Freeze Frame: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

5. Read ECU Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

6. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their Operability.

7. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

8. O2 Sensor Monitoring Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

9. I/M Readiness: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

10. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

1. Key Fob Programming: Add An Extra Key for The Vehicle,Add new mechanical keys, all smart keys, disable lost keys, remote learning.

2. Auto VIN & Auto Scan: iSmart800 Pro features with Auto Vin function to easily read the vehicle identification number. Once this diagnostic tool and the given car are properly connected, iSmart800 Pro perform a comprehensive scan of all available systems of your vehicle. With only one click, you can scan your car’s detailed version information, also all diagnostic trouble codes and live data stream of full electrical control units. If needed, you can only view the diagnostic information of the selected systems in the forms of checks.

3. Live Data Stream: iSmart800 Pro display live data stream in text or graph like misfire data, engine rpm, transmission oil temperature, mass air flow sensor data, cylinder balance rates, fuel pressure, actual fuel temperature vs desired fuel temperature and etc.

4. One Click Update Online & 3 Years Free Update: iSmart800 Pro comes with one click online and 3 years free update to get the newest software that can support more functions and new vehicle models coverage. The device still can work normally even when the free updates period expires.

For Abarth, For Acura, For Alfa, For AstonMartin, For Audi, For BRILLIANCE, For BYD, For Bentley, For Benz, For BMW, For Bugatti, For CHANGAN, For CHANGHEAUTO, For CHERY, For CHERY_NE, For Chrysler, For Citroen, For Dacia, For Daewoo, For Daihatsu, For EMGRAND, For ENGLON, For FOTON, For Ferrari, For Fiat, For For d, For For dAU, For For dEU, For GEELY, For GLEAGLE, For GM, For GMBrazil, For GREATWALL, For Holden, For Honda, For Hyundai, For HyundaiCV, For Infiniti, For Isuzu, For Jaguar, For KARRY, For KIA, For LIFAN, For Lamborghini, For Lancia, For LandRover, For Lexus, For MAPLE, For Mahindra, For Maserati, For Maybach, For Mazda, For Mini, For Mitsubishi, For Nissan, For Opel, For Perodua, For Peugeot, For Porsche, For Proton, For RELY, For RIICH, For Renault, For Rollsroyce, For Saab, For Scion, For Seat, For Skoda, For Smart, For Sprinter, For SsangYong, For Subaru, For Suzuki, For TATA, For Toyota, For VW, For VW_CV, For Vauxhall, For Volvo...

Note: Not all cars support. Please send the specific car model to the seller to check the compatibility before purchasing. Not Support FORDAU, HOLDEN models in Australia

English, Spanish, German, French, Portuguese, Swedish, Italian, Russ

ian, Japanese, Korean, Hungarian, Thai, Slovak, Simplified Chinese and Traditional Chinese

Note: (No Polish and Dutch language)After you get the product, please tell us your machine serial number to activate the language you need. SN is located on the back of the equipment body.

1. One-click Feedback: Real-time recording of diagnostic data, one-click feedback to Vident technicians, and timely resolution of diagnostic faults.

2. Diagnostic Report: Click EMAIL button to send diagnostic report to drivers or Vident technicians, help to understand diagnosis easily.

3. Datastream Record & Playback: Click the record button during the diagnosis process to collect diagnosis data in real time, which can be viewed in Data Management.

4. Remote Control: First-class remote diagnosis function, VIDENT technicians can provide remote service at any time t solve customer problems quickly.

Operating System：Android 7.1.2

Processor：Cortex-A7, 1.4Ghz

Memory：1GB RAM & 72GB ROM

Display：7.0inch Touch Screen

Resolution: 1024 x 600

Connectivity：WIFI, Type C, TF card

G-sensor：Gravity acceleration sensor

Power and Battery：7200mAh

Input Voltage：DC/12V 2A

Operating Temperature：0 ~ 40°C

Storage Temperature：-20 ~ 60°C

Dimensions (W x H x D)：246*156*32mm

1PC x iSmart800 Pro Main Unit

1PC x DC Power Charger

1PC x OBDII Diagnostic Cable

1PC x User Manual

1PC x Quick User Guide