adblueobd2

1.Drive your truck without Diesel Exhaust Fluid!
2.ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3.Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.

AdblueOBD2 Emulator for IVECO Trucks Plug And Drive Ready Device By OBD2 is a one of our adblueobd2 Tools, you can buy AdblueOBD2 Emulator for IVECO Trucks Plug And Drive Ready Device By OBD2 from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of AdblueOBD2 Emulator for IVECO Trucks Plug And Drive Ready Device By OBD2

1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.

1. Pull the Key out from the ignition.
2. Remove the following Fuses (IVECO) Terminal - 5 Terminal - 15
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.

• 1pc x adBlueOBD2 Emulator Box Interface
• 1pc x User Manuel English

Go to Buy: AdblueOBD2 Emulator for IVECO Trucks Plug And Drive Ready Device By OBD2