Vident ISMART800PRO Car Diagnostic Tool

iSmart800Pro is Vident new Android based scan tool featured with intuitive user interface, sophisticated diagnosis, wide vehicle coverage, advanced graphing, Bi-directional component tests, component calibration. It utilizes a 7 inch high resolution IPS LCD touch screen (1024 x 600), a secure, solid-state 72GB hard drive and a Cortex processor that delivers boot-up in less than 30 seconds, the multitask-capable Android 7.1.2 Operating System to offer you the best intuitive user interface and user-definable configuration. With an unusual combination of sophistication and simple operation, iSmart800Pro is suited to any tech—from rookies to seasoned diagnostic specialists.

️ OE Level All Systems Diagnostic

️ Support CAN FD Protocol.

️ Professional Key Programming.

️40+ Kinds of Reset & Service Functions

️ Auto VIN/Scan+ Active Test (Bi-Directional Control).

️ Extensive Vehicle Coverage of 85+ Car Brands, For more than 10000+ cars.

️ iSmart800 Pro Can Support 15 Kinds of Language

️ 3 Years Free Update + 2 Years Warranty + Lifetime Technical Support.

️ 7200mAh Battery For 30H Run Time.

️ 1.4GHz processor, 1GB and 72GB onboard memory, dual-band WIFI.

The iSmart800 Pro diagnostic application can establish a data link with the electronic control system of the test vehicle for vehicle diagnosis. The app performs functional tests, retrieves vehicle diagnostic information such as fault and event codes, and real-time data on various vehicle control systems such as ABS, SRS, engine, transmission, braking system, emission system, fuel system, lighting system, wipers system etc.

For engine System: The diagnostic tool iSmart800 Pro can help detect the engine ignition, fuel injection, air-fuel ratio and exhaust emission conditions in the engine system to improve vehicle performance, save energy and reduce exhaust emissions.

For Gearbox: When your car slips or has difficulty shifting gears, it is of great significance for safe driving, this diagnostic tool can find out the problem by reading the code in the gearbox system, or check the health status through real-time data.

For ABS Systems: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you need to retrieve the ABS codes to tell you where the problem is, and that's what this diagnostic program does for you.

For SRS System: SRS, safety restraint system, consists of shock sensor, control module and airbag itself, this diagnostic tool can detect every electronic parameter to check its health status.

More...

Oil Light Reset: After changing the oil, turn off the oil service light and reset the maintenance mileage and maintenance interval.

EPB Reset: Safely reset the new Electronic Parking Brake that brakes the wheels again.

Throttle Relearn: Allows resetting the throttle actuator to accurately adjust throttle (or idle engine) operation, helps keep idle and acceleration smooth.

TPMS Reset: Re-learn the TPMS sensor so that the ECU can recognize the new sensor.

ABS Bleeding: Get a solid brake pad after exhausting.

IMMObilizer: Allows disabling lost car keys to prevent vehicle theft and adding new keys.

DPF Regeneration:Allows to remove PM in DPF filter by oxidation or combustion to stabilize filter performance.

Fuel Injector Coding: Code new injectors after replacement for precise fuel injection control and improved fuel efficiency.

SAS Calibration: Clear the faulty steering angle sensor memory and calibrate the steering angle sensor.

BMS Reset: Register the newly replaced car battery into the ECU.

Other Funtion Include: A/C Learn, AJUSTE, AT Adaption, Adblue, Airbag, BRT, Change Language, Change Tire, Clutch Adaptation, Coolant, RGR Reset, EVAP Test, GPF, Gear Box, Gear Learn, Head Light, High Voltage Battery, Motor Angle, NOx Reset, Odo-*-meter, Power Balance, Prime Fuel Pump, Seat Match, Steering Angle, Stopstart, Sun Roof, Suspension, TCM 0il Reset, Transport, Turbo, Windows Door.

Verify full bi-directional control capability of system inputs/outputs by sending commands to the vehicle's systems/components. Such as EVAP test, compression test, radiator fan on/off, A/C clutch on/off, fuel pump, window/mirror/door lock test, pump and value test, interior and exterior light test, horn test, etc.

IMMO service can disable lost car keys and program replacement keys. One or more replacement key fobs can be programmed. Like program new key fob, read PIN/PIN calculation, check number of keys, generate keys, add keys, all keys lost.

Read PIN code/pin code calculation

Check number of keys

Generate dealer key

Add key

Note: For higher-security vehicle brands like for VW/BMW/Benz or for Toyota smart key All key lost, etc. you need other professional Key Programmers.

Read Trouble Codes: Displays detailed descriptions of Diagnostic Trouble Codes (DTCs)

Clear trouble codes: turn off check engine light (MIL), clear codes and reset monitors

Real-time data: Real-time graphics display the continuous data flow information of the vehicle.

Read Freeze Frame: Checks certain vehicle conditions recorded by the on-board computer when emissions-related faults occurred.

Read ECU information: display information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number).

Component testing: Certain vehicle components can be activated by commands sent from the scanner to test their operability.

Onboard Monitor Test: Retrieves and displays test results for emissions-related powertrain components and systems.

O2 Sensor Monitoring Test: Allows retrieval and viewing of O2 sensor monitoring test results for the most recently performed tests from the vehicle's on-board computer.

I/M Readiness: Shows whether the various emissions-related systems on the vehicle are functioning properly and are ready for inspection and maintenance testing.

Read vehicle information: Display information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number).

Remote Key Programming: add extra keys to vehicle, add new mechanical keys, all smart keys, disable lost keys, remote learning.

AUTO VIN & AUTO SCAN: The iSmart800 Pro has an auto VIN feature for easy reading of Vehicle Identification Numbers. Once this diagnostic tool and a given car are properly connected, iSmart800 Pro will perform a full scan of all available systems of your vehicle. With just one click, you can scan your car's detailed version information, as well as a real-time data stream of all diagnostic trouble codes and full electronic control units. If desired, you can view diagnostic information for the selected system only as an inspection.

Real-Time Data Stream: iSmart800 Pro displays real-time data stream in text or graphics, such as misfire data, engine speed, transmission oil temperature, mass air flow sensor data, cylinder balance ratio, fuel pressure, actual fuel temperature and required fuel temperature, etc. .

One-Click Online Update and 3-year Free Update: iSmart800 Pro provides one-click online and 3-year free update to get the latest software that can support more functions and new car model coverage. After the free update expires, the device will still work normally.

For Abarth, For Acura, For Alfa, For AstonMartin, For Audi, For BRILLIANCE, For BYD, For Bentley, For Benz, For BMW, For Bugatti, For CHANGAN, For CHANGHEAUTO, For CHERY, For CHERY_NE, For Chrysler, For Citroen, For Dacia, For Daewoo, For Daihatsu, For EMGRAND, For ENGLON, For FOTON, For Ferrari, For Fiat, For For d, For For dAU, For For dEU, For GEELY, For GLEAGLE, For GM, For GMBrazil, For GREATWALL, For Holden, For Honda, For Hyundai, For HyundaiCV, For Infiniti, For Isuzu, For Jaguar, For KARRY, For KIA, For LIFAN, For Lamborghini, For Lancia, For LandRover, For Lexus, For MAPLE, For Mahindra, For Maserati, For Maybach, For Mazda, For Mini, For Mitsubishi, For Nissan, For Opel, For Perodua, For Peugeot, For Porsche, For Proton, For RELY, For RIICH, For Renault, For Rollsroyce, For Saab, For Scion, For Seat, For Skoda, For Smart, For Sprinter, For SsangYong, For Subaru, For Suzuki, For TATA, For Toyota, For VW, For VW_CV, For Vauxhall, For Volvo...

English, Spanish, French, Geraman, Portuguese, Swedish, Chinese, Traditional Chinese, Russian, Japanese, Korean, Thailand, Slovakia, Hungarian, Italian.

Note:(No Polish and Dutch language)After you get the product, please tell us your machine serial number to activate the language you need. SN is located on the back of the equipment body.

1. One-click Feedback: Real-time recording of diagnostic data, one-click feedback to Vident technicians, and timely resolution of diagnostic faults.

2. Diagnostic Report: Click EMAIL button to send diagnostic report to drivers or Vident technicians, help to understand diagnosis easily.

3. Datastream Record & Playback: Click the record button during the diagnosis process to collect diagnosis data in real time, which can be viewed in Data Management.

4. Remote Control: First-class remote diagnosis function, VIDENT technicians can provide remote service at any time t solve customer problems quickly.

Operating System：Android 7.1.2

Processor：Cortex-A7, 1.4Ghz

Memory：1GB RAM & 72GB ROM

Display：7.0inch Touch Screen

Resolution: 1024 x 600

Connectivity：WIFI, Type C, TF card

G-sensor：Gravity acceleration sensor

Power and Battery：7200mAh

Input Voltage：DC/12V 2A

Operating Temperature：0 ~ 40°C

Storage Temperature：-20 ~ 60°C

Dimensions (W x H x D)：246*156*32mm

1PC x iSmart800 Pro Main Unit

1PC x DC Power Charger

1PC x OBDII Diagnostic Cable

1PC x User Manual

1PC x Quick User Guide