QUICKLYNKS

This Battery tester is designed to test the condition of the motorcycle battery using conductance method. Unlike the conventional method of draining the battery by applying resistance load to it and obtain the result from the meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells and observes the AC current that flows in response to it.

QUICKLYNKS BA102 Motorcycle Battery Tester is a one of our QUICKLYNKS Tools, you can buy QUICKLYNKS BA102 Motorcycle Battery Tester from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of QUICKLYNKS BA102 Motorcycle Battery Tester

1. Conductance correlates directly to the battery capacity
2. Passive testing method is safe.
3. Never discharges or drain the battery.
4. Able to test condition of discharged battery.
5. Consistent and repeatable results.
6. Provides unique indication of battery conditions.
7. provides check the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.
8. It powers up when connected to the battery posts during testing.

1. Simple and easy to use
2. Test batteries on and off the motorcycle
3. Accurate results in milliseconds
4. Battery Life Analysis
5. Analysis Result : Good or Replace
6. Large easy to read LCD display.
7. Test results based on JIS, EN, DIN, SAE and IEC Standards.
8. Languages: English,
9. Quick test—input battery volume (AH), then it can show the battery status.
10. Store the testing result, print function

1. Open Offcial Website
2. Log Name: l2h5s9x8c0b3d
3. password: i8a0j3b6e2h9f8v

• Test Result: Good or Replace
• Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
• Internal resistance value (m? )
• Life in percentage (%)
• Cranking system
• Charging system
• Print

Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.

• System voltage: 12 Volts
• Input voltage range: 9V~15V
• Power requirements: No internal batteries required. Power on when hooked up during testing.
• Testing range: 20 ~ 300 CCA, 20 ~ 300 DIN, 20 ~ 300 IEC, 20 ~ 300 EN
• AH range: 0-33AH

QUICKLYNKS BA102 Motorcycle Battery Tester Testing Result:

• 1pc x QUICKLYNKS BA102 Motorcycle Battery Tester

Go to Buy: QUICKLYNKS BA102 Motorcycle Battery Tester