GODIAG V600-BM is a professional BMW diagnostic and programming tool. It has the capabilities of intelligent vehicle diagnosis, ECU programming, calibration and some special functions. It supports all mainstream BMW diagnostic software on the market. It features in high-performance CPU, WIFI dual mode (STA/AP), Ethernet communication.
GODIAG V600-BM BMW Diagnostic and Programming ToolGODIAG V600 is a BMW professional diagnostic & programming / coding tool, it will replace GT1, OPS, OPPS, ICOM, ICOM A2, ICOM A3, ICOM NEXT. GODIAG V600-BM CAN-FD
J2534 can access to all systems of newest
BMW car models to quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming , retrofitting and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features etc.
/>
Support OEM professional diagnostic function of all For BMW series:1 series: 1'_E81/E81/E87/E88,1'_F20/F21
2 series: 2'_F22/F23,2'_F45/F46,2'_F87
3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
4 series: 4'_F32/F33/F36,4'_F82/F83
5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
6 series: 6'_E63/E64,6'_F06/F12/F13
7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26
Z series: Z4_E85/E86,Z4_E89
I series: I'_I01/I02
MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60, MINI_F55/F56
GODIAG V600 Features:1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT etc, no need to install any driver.)1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.
2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models
3).
engineer programming & coding software for F series vehicles
4). WINKFP:
engineer programming software for E series vehicles.
5). NCS-Expert Tool:
engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.
7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicles.
2. Provide a variety of communication modes:USB 2.0
DoIP indicator
Ethernet 10/100Mbps
WIFI/BT 802.11 indicator 150Mbps
ETH indicator
System Indicator
3. SpecificationsSuitable power: 7-32 V
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)
4. Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next etc. 5. The Button Function:F1-Press it for more than 3s to reset factory setting
F2-Press it to restart system
GODIAG V600-BM Parameters: Shell | The shell is made of Polyamide. Size:108 x 52 x 27 mm |
Power Supply | 7-32 V |
Current Consumption | About 300 mA when the power is 12V |
CPU | 580 MHz MIPS, 32MBFLASH, 128MByte RA, built-in 32G TF card(optional) |
Operating System | Linux |
WIFI | 150Mbps Wi-Fi 1T1R 802.11bgn |
Bluetooth | Bluetooth5.0/5.1 |
Interface | USB 2.0 Ethernet 10/100Mbps |
Indicator | DoIP indicator WIFI/BT indicator ETH indicator System indicator |
Buzzer | Sound Pressure Level: MIN.80 dB |
Temperature | Working:-20 ... +55°C, Storage:-20 ... +85°C |
Protection Rating | Dust prevention and water resistance conform to IP52 |
Conform to Electromagnetic Compatibility | Noise emissions:EN 55011,EN 55022 Anti-interference:EN 61000-6-2, EN 61000-6-4 |
GODIAG V600-BM Package includes:1pc x GODIAG V600-BM CAN-FD
J2534