Autophix BAS300 Plus 2 in 1 Automotive Scanner

Autophix BAS300 Plus OBD2 engine Check Battery Tester 2-in-1 Automotive Scanner Professional Code Reader OBD Car Diagnostic Tool

Autophox BAS300 Plus is a full mode OBDII engine, battery reader, with unique one-click I/M readiness design, which fast to scan engine healthy test battery voltage change status in graphing. Enhanced engine & battery diagnosis,free upgrade,print and storage data are its biggest advantages.

Why You Need Autophix BAS300 Plus?

【2 IN 1 CAR DIAGNOSTICS TOOL】You love your car, don’t you? And you want to keep driving it as long as you can, right? There are few things your car will require of you to maintain its longevity then — Diagnostic engine system, smog check, and EVAP test. But one thing that does the most to ensure your car will run smoothly is taking care of your car battery. Don't worry, let the OBD2 Battery Tester to give your car a thorough maintenance.
【12/24 VOLT BATTERY TESTER】A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally. And quickly provide more accurate test results, displays voltage value, standard CCA, measured CCA, SOH, SOC, and internal resistance.
【PROFEESIONAL OBDII DIAGNOSIS】Autophox Code Reader is equipped with strong full 10 modes obdii diagnostic functions. It can read and erase fault codes, and stored codes. This automotive scanner diagnostic tool shows I/M readiness, freeze frame data, displays live data in the text and graph format, retrieves auto VIN, reviews the recorded DTC, and shows Live O2 Sensor and EVAP Test, On-board Monitoring. All these powerful features are designed to protect your car.
【POWERFUL COMPATIBILITY】OBD2 Mode- Works with every gas-powered vehicle 1996 and newer. Supports 8 different languages, more than 60 U.S, Asian and European vehicle brands and over 10,000 different vehicle types; Battery Test - Works on all 12V and 24V lead-acid batteries from 100 to 2000 CCA, including regular flood batteries, AGM flat batteries, AGM spiral batteries, GEL and EFB batteries for lawn mowers, motorcycles, cars, light trucks, boats, etc.
【ONE-CLICK I/M READINESS】+【A MUST HAVE FOR QUICK SMOG CHECK】This scanner Autophix BAS300 Plus enables you to do a quick smog check to confirm if your car could pass the emission test. Autophix BAS300 Plus code scanner---Best item to have before the annual inspection. Great idea for your friends, husband, and family.
【LIVE DATA IN GRAPH】+【ON-BOARD MONITOR TEST】The codes reader would diagnose the misfire and the live O2 sensor to monitor that misfire comes from which bank and cylinder. What's more, this Autophix BAS300 Plus obd2 scanner will graph all the real-time streaming data it reads, including but not limited to Engine Coolant Temperature, Short Term Fuel Trim, Long Term Fuel Trim, Engine RPM, Oxygen Sensor Output Voltage, etc.
【LIFE-TIME FREE UPDATE & 2 YEARS WARRANTY】 The BAS300 Plus supports lifetime free software upgrades, new parameters, functions and the latest vehicle data are constantly updated via the USB port over the Internet. We provides 2 Years warranty, And there is a technical support for timely and effectively solving the quality problem within 24 Hours.

Support OBD Full-Mode Diagnostics, Easy To Use And Save Your Time

️Read Codes/ Erase Codes: identifies which section of the emission control system has malfunctioned. erases the codes from the vehicle after certain repairs.

️I/M Readiness: checks if the various emissions-related systems are ready for the Vehicle Inspection and Maintenance testing or if the repairs has been performed correctly.

️Data Stream: displays the dynamic data of the data stream items in graphical way, Simpler and easier to understand.

️View Freeze Frame: records the certain vehicle conditions when an emission-related fault occurs.

️O2 Sensor Test: monitors and tests operation of the O2 sensors to identify problems that can affect fuel efficiency and vehicle emissions.

️On-Board Monitor Test: retrieves test results for emission-related powertrain components and systems that are not continuously monitored.

️EVAP System Test: initiates a leak test for the vehicle’s EVAP system.

️Vehicle Information: Retrieve vehicle’s Vehicle identification number, calibration ID, and calibration verification number, to know more about your vehicle.

️Battery test: coder reader offers an easy way to analyze the battery cell health status, view battery charging status and detect faults and bad cells.

️DTC LOOKUP: Code Reader enables you to view the detailed definition of the retrieved DTC easily, you only need press “I”.

️REPORT: If you are unable to determine the problem, you can Print report out the diagnostic data and send the data to your mechanic for help.

Battery Test Functions:

1..Test Result Good, Recharge or Replace

2.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mΩ) and Life in percentage (%)

3.Cranking system and Charging system

4.Record and re-play battery data.

5.Battery test, cranking test, charging test and other additional functions.

6.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,DIN and IEC are supported

Charging Test

Test different parts of charging system,including generator,rectifier,rectifier diode,and so on for a reliable charging volt value

Cranking Test

Analyze the actual cranking voltage and the cranking time to help you quickly figure out the whole state of the starting system

More Functions

1.DTC LOOKUP-fault code query function

2.Review DTC-view recorded fault codes

Car Battery Tester Application

Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.

Feedback

When the OBD2 function shows connected error with vehicle,please using the feedback function.

Support 10 Languages:

English, French, Spanish,German, Russian, Italian,Portuguese, Finnish,Dutch,Polish

Autophox BAS300 Plus Diagnostic Car Maker Coverage:

American (USA) car:

Compatible with Standard OBD2 Cars from 1996 to Now:
For Chrysler, for Ford, for GM, for Jeep

European car:

Compatible with Standard OBD2 Cars from 2003 to Now:
For Alfa Romeo, for SAAB, for Acura,
for Opel, for Audi, for Seat,
for Bentley, for Skoda, for Daewoo,
for Benz, for Daihatsu, for Land Rover,
for BMW, for Vauxhall, for Volvo,
for VW, for Ford, for Jaguar

France Car after 2006:

for Citroen，for Fiat，for Renault，for Peugeot
Not Support for Renault Clio 2/Megane/Dacia Logan,

Japanese car

Compatible with Standard OBD2 Cars from 2005 to Now:
for KIA, for Isuzu, for Honda ,
for Mitsubishi, for Hyundai, for Dacia,
for Lexus, for Mazda, for Nissan,
for Subaru, for Suzuki, for Toyota

Chinese car:

Compatible with Standard OBD2 Cars from 2008 to Now:
for BYD, for Chery, for Geely,
for Great Wall, for Karry

NOTE:

Not Support Russian Cars, VAZ,UAZ,LADA
Not works with Trucks, Pickups, Vans

Note:

If you want to know whether car is standard OBDII or not,please leave message in format, "Audi A4 2002, 2.0T diesel", we will reply you within 12 hours.

Life- time Free Update and Print

Support data storage and upload to computer for printing

BAS300 Plus Size

Specifications

Display 2.4"TFT 262K true color
Cable Reach 850 mm (33 .5inches)
Operating Temperature 0 to 60°C(32°F to 140°F)
Storage Temperature -20 to 70°C(-4°F to 158°F)
External Power 6.0 to 30.0 V power provided via vehicle battery