Ad blueOBD2 Emulator For renault

AdBlue obd2 Emulator for RENAULT Trucks
1.AD-Blue/DEF and NOx Emulator works via OBD2
2.Plug and Drive Ready Device!
3.Drive your truck without Diesel Exhaust Fluid!

AdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System Instantly is a one of our Ad blueOBD2 Emulator For renault Tools, you can buy AdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System Instantly from chinaobd2.com.

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of AdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System Instantly

AdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System InstantlyAdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System InstantlyAdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System InstantlyAdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System InstantlyAdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System Instantly

AdBlue OBD2 Emulator for RENAULT Trucks
Drive your truck without Diesel Exhaust Fluid!
AdBlue OBD2 is a Plug & Drive Ready device to emulate working ad-Blue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged ad-Blue SCR system.
AD-Blue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use AD-Blue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your ad-Blue/DEF tank.
Top 7 Reasons to Get Ad-blue OBD2:
  1. AdBlue OBD2 is a device which can be plugged into OBD2 connector of your truck to emulate working
  2. ad-Blue system and NOx sensor on trucks, even with damaged ad-Blue SCR system.
  3. AdBlue OBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
  4. AdBlue OBD2 will override AD-Blue system instantly, it will stop the usage of ad-Blue liquid and disable Nox sensors.
  5. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
  6. AdBlue OBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
  7. AdBlue OBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug AdBlue OBD2 from OBD2 connector.

AdBlue OBD2 Installation and Calibration:
  1. Pull the Key out from the ignition.
  2. Remove the following Fuses (RENAULT)
    25A
    P59
  3. Plug AdBlue OBD2 into OBD2 connector
  4. Turn on the ignition and check the level of ad-Blue, if it shows 50% or 70%.
  5. If any fault light appears on dashboard, delete via service scanner.
Package content:

Go to Buy: AdBlue OBD2 Emulator For RE-NAULT Trucks Override Ad-Blue System Instantly

Share to Pinterest