XTOOL InPlus IK618 Auto Key Programmer X100PAD3 For Toyota/Benz All Key lost with Kc100 For VW 4th&5th IMMO Diagnostic Tool

IK618 XTOOL scanner, you can easily achieve read and clear fault codes for full systems, view live data graphing, freeze frame, perform active tests, read ECU info, performs full bi-directional control abilities to verify various system input/output by sending commands to vehicle’s systems/components.

ik618 can automatically identify the VIN code of the car, and identify the model and year of the car.
(If the VIN is not automatically recognized, you can contact the brand to add your vehicle in the next upgrade, or you can work through manual input)

Backup IMMO data: Used to read, write and backup the EEPROM chip inside the immobilizer module.

Check number of keys: check out how many keys that had been registered to the vehicle right now.

Read PIN code& key info: Pull PIN code of the immobilizer of specific vehicles when it requires a pin to get access to the system.

Program/Add keys Fobs: Add another new key when you have a key that has already matched to the vehicle.

Generate dealer key: Used for generating dealer keys for Volkswagen/ for Audi/ for Fiat/for Renault/for BMW/for Land Rover, etc.

Program remote: Read the radio frequencies of the car remotes and program remote keys.

All keys lost: Make a new key in the situation where you have no active keys at the moment.

EEPROM modification: Allows you to modify EEPROM chip when unsoldered.

Write-enable functions: Allows you to write key information inside the dump files.

Advanced KEY Functions

*Add key for VW Group(For Volkswagen/Audi/Skoda/Seat/Bentley) 4th/5th IMMO system

* For Mercedes-Benz FEM3 key programming(KC501 needed)

* For BMW CAS1-3/CAS4&4+**/EWS2-4***/ISN Code reading/Gearbox reset & matching/Mileage syncronization

* Read pincode from OBD for FCA Group(For Fiat/Chrysler/Dodge/Jeep), via VPW protocol

* All key lost(pincode free) for Peuegot/Citroen/Mitsubishi(ID46/ID47 Smart keys)

* For 2015-18 Land Rover/Jaguar key matching via OBD (Special key needed)

* Key matching for latest Ford Ecosport/Escort/Focus/Transit/Explorer...

* Key matching for GM CAN FD protocols(CANFD Adapter needed)

* For Hyundai/KIA 4A smart keys reading

* For Toyota all smart key lost(94/98/88/A8/A9 Chip)(KS-1 needed)

* For 2019+ Nissan Sylphy/Altima key programming(Adapter cable needed)

* For Subaru H-Chip key matching

* IMMO reset for Toyota H-key

* For 2018+ Dodge/Jeep/Chrysler key programming(Specialized cable needed)

* And more...

**CAS4/CAS4+ can learn keys via OBD.

***When working on EWS2/3, you'll need to disassemble the immobilizer module.

Performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings, disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And reset the adaptive data for certain components after repairs or replacements. With VAG Guide Functions, IK618 scan tool can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/Audi/Skoda, etc.

Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Window/Mirror/Door Lock Test, etc.

Oil Reset: Reset service intervals after oil change and turn off the oil light.

EPB Reset: Reset brake pads after replacement of brake system.

SAS Adjustment: Perform calibration of the steering angle sensor

DPF Reset: Perform DPF regeneration

BMS Reset: Register the new battery to the ECU after replacement.

Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

Injector Coding: Coding injectors after replacement.

Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.

EEPROM ADAPTER: EEPROM chip stores the immobilizer data (like pincode) and odo~meter data, and sometimes you need to unsolder it to read & write the data inside the chip, flash the data, write start, data recovery, and so on.

Full Special functions: Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Crankshaft Sensors Relearn, Window Initialization, TPMS Reset, Air Suspension, Injector Coding, Airbag Repair, Cylinder Power Balance, Seat Configurations, Electronic Pump Activation, Disable Transportation, Performance Tire Upgrade, ECU configurations, A/F reset, Language change, Start/Stop Reset, etc.

14 Kinds Languages Supported: Remove language barriers and support English, French, Spanish, Portuguese, German, Russian, Dutch, Japanese, Italian, Polish, and Korean etc.

Android 5.1.1
OS Quad-Core 1.6Ghz processor
7 inch 1024*600 Touch screen
CAN FD Protocol
5,000mAh battery
2GB +32 GB memory
2 Years Free Update +3 Years Warranty

KC501 needed/M821 Adapter needed(B09QZMWDTN) For Mercedes-Benz FEM3 All keys losst situation
Chrysler 12+8 SGW cable needed(B0B4D76NWB) For 2019+ models from FCA Group (for Fiat/Chrysler/Dodge/Jeep)
KC501 needed(B09PQL4WSF) For Land Rover/Jaguar 2015-18 key matching via OBD
KS-1 Key Programmer needed(B09SNWWVX3) For Toyota models with smart keys All keys losst situation
Nissan CGW cable needed For Nissan Sylphy/Sentra (B18) 2019+ key programming
KS-1/M822 Adapter needed All keys lo~st for Toyota models with blade keys (8A Chip)