Vgate iCar Pro WiFi OBD2 scanner for iOS and Android

Vgate iCar Pro WiFi OBD2 scanner for iOS and Android

Vgate iCar OBD II adapter is a powerful car diagnostic tool developed by HK Vgate Technology Co Ltd.It is compliant with full OBD II/EOBD specifications. Various wireless connection modes* to connect your smartphone or pad.It reads the real-time car engine data, such as engine speed, ignition time, fuel trim, water temperature, fuel consumption.It support a variety of OBD II apps.

offer top quality Vgate iCar Pro WiFi OBD2 scanner for iOS and Android

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Vgate iCar Pro WiFi OBD2 scanner for iOS and Android

• CLEAR CHECK ENGINE LIGHT - This iCar Pro code reader will help you save money and accurately diagnose check engine light problem. Very easy to use.
• EASY FITMENT - The majority of cars made in the past 2 decades are fitted with an OBD2 diagnostic port, simply find the port and plug the iCar Pro in.
• FIT AND FORGET - It really is possible to fit and forget beacuse it's micro size and unique power saving functionality that protects your battery
• WORKS WITH HUNDREDS OF APPS - The Vgate iCar Pro Bluetooth Low Energy device works with the most popular OBD apps. Please find download instruction for Android device in product description.
• 2 YEAR WARRANTY - We offer a 2 year warranty as standard. If you have any problem with the device simply send it back and we will despatch a brand new replacement the following working day.

• Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning. (over 3000 generic code definitions in the database).
• Clear trouble codes and turn off the MIL ("Check engine" light)
• engine RPM
• Calculated Load Value
• Coolant Temperature
• Fuel System Status
• Vehicle Speed
• Short Term Fuel Trim
• Long Term Fuel Trim
• Intake Manifold Pressure
• Timing Advance
• Intake Air Temperature
• Air Flow Rate
• Absolute Throttle Position
• Oxygen sensor voltages/associated short term fuel trims
• Fuel System status
• Fuel Pressure

• For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information
• Label must state that the vehicle is OBD II compliant. To be sure your vehicle complies with OBD-II, look for a sticker on the vehicle
• under the hood in the engine compartment that clearly states “OBD II compliant or certified”.

• SAE J1850 PWM(41.6 Kbaud)
• SAE J1850 VPW(10.4 Kbaud)
• ISO9141-2(5 baud init,10.4 Kbaud)
• ISO14230-4 KWP(5 baud init,10.4 Kbaud)
• ISO14230-4 KWP(fast init,10.4 Kbaud)
• ISO15765-4 CAN(11bit ID,500 Kbaud)
• ISO15765-4 CAN(29bit ID,500 Kbaud)
• ISO15765-4 CAN(11bit ID,250 Kbaud)
• ISO15765-4 CAN(29bit ID,250 Kbaud)
• SAE J1939 CAN(29bit ID,250* Kbaud)
• USER1 CAN(11*bit ID,125* Kbaud)
• USER2 CAN(11*bit ID,50* kbaud)

• Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles (Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)

• Home screen
• Go to setting page
• Open Wi-Fi
• Run Torque app
• Go to Torque app OBD II adapter settings
• Choose connection type>Wi-Fi
• Set Wi-Fi preferences in the same page
• IP address is 192.168.0.10
• Port is 35000
• Exit Torque app completely
• Run Torque app
• Connected

• Home screen
• Go to setting page
• Open Wi-Fi
• Select V-LINK
• Run Accurate app
• Go to Accurate app setting page
• Select Wi-Fi
• Exit app completely
• Run Accurate app again
• Connected

• Supply Voltage: 11.5V—15V
• Supply Current: <200Ma
• Standby Current: <30Ma (TONWON Pro =<3Ma)
• Operating Temperature: -40℃--85℃
• Operating Humidity: 5%--95%RH Non-Dewfall

• 1pc x Vgate iCar pro WIFI OBDII adapter
• 1pc x User manual

Go to Buy: Vgate iCar Pro WiFi OBD2 scanner for iOS and Android