Launch X431 Pro5 Full System Scanner with X-PROG3 Key Programmer & TSGUN TPMS Tool

Launch X431 Pro5 Full System Scanner with X-PROG3 Key Programmer & TSGUN TPMS Tool

offer top quality Launch X431 Pro5 Full System Scanner with X-PROG3 Key Programmer & TSGUN TPMS Tool

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Launch X431 Pro5 Full System Scanner with X-PROG3 Key Programmer & TSGUN TPMS Tool

Why Do You Buy launch Tools from chinaOBD2?

• launch official authorized dealer
• 2 Years Free Update Online on launch Official Website, 1 Year Warranty
• 2022 New Version, Global Version, No IP Restrictions
• Lifetime Tech Support Online

What will you get?
1set X launch x431 PRO5 Scanner
1set X launch x431 G3 Key Programmer
1 set x Launch x431 TSGUN TPMS Tool

• Adds Topology Mapping function
• 2023 New Arrivals – The genuine x431 diagnostic scanner officially authorized from LAUNCH; No IP restrictions; Extra-long 2 years software updates at no costs; Extended 5 years quality backup.
• Upgraded from LAUNCH x431 V+/PRO3/PROS/TURBO/Throttle – A rich array of future-proof functions for productive works: 1) SmartBox 3.0, J2534 Programming, Intelligent AutoVIN & AutoScan, Active Tests, All System Diagnostics, VAG Guided Function, FCA AutoAuth Access, etc.; 2) advanced Online Coding & Adaptations brings more personal settings; 3) 50+ service functions with more frequent updates to support more vehicles.
• LAUNCH X431 SmartBox 3.0 – 1) Fix the most vehicles’ problems with broad vehicle coverage; meet SAE standards for J2534-1 & -2, CANFD, DOIP and support DC9-36V for HD Vehicles; 2) also serves as a wireless VCI.
• Intelligent Diagnostics – AutoVIN & AutoScan accelerates all-systems DTC scans that clock in at an average of < 3 minutes.
• Send Commands with Bi-directional Controls – Effectively test car components on demand.
• FCA AutoAuth Access – Bypass SGM in FCA vehicles seamlessly and within seconds; works on 2017 and later Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc. *Need AutoAuth subscriptions.
• VAG Guided Function – Skip the routine procedure of entering the security access code & channel number for VW, Audi, Skoda, Seat vehicles.
• Add Modules to Expand Features – ADAS Calibration Toolkit; VSP-600 VideoScope; X431 TPMS TSGUN; BST360 Bluetooth Battery Tester; X-PROG & X-PROG3 Immobilizer.
• Non-16pin Connectors & Cables Kit – enable to work on varied vehicles across the world.
• User-Oriented – One-touch software updates; 24/7 online feedback; save, record data, and automatically generate reports to share via email; 12-channel graphic live data stream displayed in one screen with max. 4 streams can be merged; 25 languages menu.
• Multilingual Support: English,Simplified Chinese, Traditional Chinese, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Serbian, Finnish, Swedish, Czech, Italian
• APP language: English, German, Russian, French, Traditional, Portuguese, Japanese, Spanish, Italian
• Great Combination – Android 9.0 OS, 8-core 1.8GHz processor, 4GB RAM & 64GB ROM (128G expandable), 10.1” HD 1920*1200 touchscreen, 8MP rear & 5MP front camera, 7000 mAh battery, etc.

Launch X431 G3 Highlights:
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most engine/ Gearbox ECUs Without Disassembling the Shell
3. Supports VW/ Audi MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
4. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
5. Compatible with Multiple X-431 Series Diagnostic Tablet (X-431 V, X-431 V+, X431 ProS, X-431 PAD V, X-431 PAD VII, etc)
6. Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.

X-PROG 3 Functions

1. Read BMW engine ISN code.

2. Read/write BMW CAS4+ and FEM chips.

3. Read/write Audi fifth-generation steering column chips

4. Read/write EEPROM.

5. Read/write MCU.

6. VW Fourth-generation Dump Mode All Keys Lost.

7. Read engine in BENCH mode.

8. Read gearbox data.

More features are constantly updated

Supported Brands

VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates to be continued)

Supported Systems

Engine system, automatic transmission, instrument system, CAS, body system, lock system…

Features:

1. 1.77 inch color screen

2. Instantly read tire pressure, tire temperature and battery status

3. Diagnose tire pressure fault, including read DTC, clear DTC, etc.

4. Activate and match all 315MHz or 433MHz sensors

5. Read, copy and write the sensor ID quickly

6. Reprogram LAUNCH sensors with unlimited times

7. Built-in tire pressure learning instruction makes operation more easy

8. Cover 98% global vehicles with tire pressure system

Specification

Unlimited Repeat Programming

LAUNCH TSGUN can program LAUNCH LTR-01 SENSOR only,vehicle model is not limited, as long as the x431 tablet can support the model can be programmed.It can program 8 LAUNCH LTR-01 SENSOR simultaneously.

3 Modes to Program LAUNCH LTR-01 SENSOR

1. Manually create can manually enter the original ID
2. Automatic creation the system automatically generates ID
3. Copy ID copy the old sensor ID to the LAUNCH LTR-01 SENSOR if the old sensor can still be activated

ACTIVATE TPMS SENSORS

• TSGUN can activate all 315/433MHz tire pressure sensors with LAUNCH X431 series tablet (8 inches and above). Use TSGUN to touch the tire pressure sensor on the tire. Press the OK button to see the sensor on the tire pressure monitoring interface of the launch x431 tablet. And collected tire pressure information, such as sensor ID, tire pressure, tire temperature, battery status, sensor location, etc.
• Visual interface, simple and easy to understand, quickly understand your tire status.
• The sensor's default activation sequence : left front----right front----right rear----left rear

TPMS Diagnose（Activate all TPMS sensors before TPMS Diagnose）

• Diagnose the TPMS system, read and clear the TPMS dtc, view the detailed description of the dtc, and check the status of all TPMS sensors.

Relearn 98% sensors

Quickly relearn sensors: LAUNCH TSGUN can relearn 98% of OEM TPMS sensors to the car's ECU in 3 ways

• OBD Relearn:Write TPMS sensor id toTPMS module throughOBD connector
• Automatic Relearn:Complete by driving
• Stationary Relearn:placed in the "Learn Mode"

Go to Buy: Launch X431 Pro5 Full System Scanner with X-PROG3 Key Programmer & TSGUN TPMS Tool