LAUNCH X431 CRP919E Global Version Full System Car Diagnostic Tools with 31+ Reset Service Auto OBD OBD2 Code Reader Scanner

LAUNCH CRP919E scan tool is the newest LAUNCH CRP series product which can do full system diagnosis and support 29+ special service functions. It is the upgraded version of launch CRP123/CRP123E/CRP129E/CRP429C/CRP909E.

1. 2 years free update, and CRP919E still can be used after 2 years free update.

2. 31 reset functions, update your CRP919E to get following new features.

a. Gas Particulate Filter (GPF) Regeneration

This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.

b. Intelligent Cruise Control System Reset

This function is used to matching the intelligent cruise control module after it is replaced or repaired.

The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc. But please note, ecu coding are NOT universal for all vehicles, please check compatibility with VIN number before purchase.

10. Share Diagnostic Report
Generate Diagnostic report with one click, share the diagnostic report with your friends, find out the problem quickly and easily.

【All-in-One Android 7.0 ScanPad LAUNCH CRP919E】LAUNCH CRP919E Scan Tool is the Newest LAUNCH CRP series product which can do Full system diagnosis and support 29+ special service functions. Quickly generate and store a vehicle Health Diagnostic Report as a reference for vehicle inspection and maintenance.When you have some technical questions, you can share and print the Health Reports in Seconds to friends or mechanic to ask for solutions.

【All System Diagnostics+31 Maintenance & Reset Function】LAUNCH CRP919E full system car code is a powerful car scan tool.It can read/clear codes, Text & Graph Live data for all vehicle systems including engine, Transmission,Chassis and Safety control system,Body control system,Communication and Entertainment system. Support Reset function of Oil Lamp, EPB, DPF, SAS, TPMS, Sunroof, Suspension, Gearbox, AFS. And do BAT service,IMMO Key Programming,ABS Bleeding,Injector Coding,Throttle Adaptation,Gear Learning. EGR Adaption, Reset HVOLBAT, Reset ENGPBM

【Active Test + CANFD/DIOP】This LAUNCH bidirectional scan tool can output commands to a vehicle’s ECUs, read the ECU data, and monitor the operation of the actuators. Through active tests on certain components, such as fuel pumps, a/c fan, inside mirrors, headlamps, windows, and horns, this bidirectional scanner will let you quickly know whether a specific system, component, or subsystem is functioning properly or not, helping you locate the car issues precisely. Work for Can FD Compatibel Vehicles It is mainly for the detection of license plates of CAN FD communication protocols such as GM, Jaguar, and Land Rover (reading fault codes, data streams and other special functions).

【Patented Design】LAUNCH CRP919E OBD2 scanner is well built with a 7.0 inch IPS capacitive touch screen,a bigger,brighter Screen,let you“deep dive”into Tons of live data PIDs, Android 7.0 Operating System, Longer Battery Life:Equipped with 6000mAh rechargeable lithium battery, longer running and standby time, Equipped with Quad core processor, Larger Memory Scanner with 2GB RAM & 16GB ROM, Longer OBDII 16PIN Cables. TRUST LAUNCH Brand, Help You Save Thousands of dollars .

【One-Click WIFI Update + Auto VIN Tech】One-Click WIFI Free Update. WIFI connectivity, you can update your software anytime anywhere and share diagnostic report to email at ease. No IP limited! Auto VIN: Once connect with car OBD2 port, CRP919E will Auto Detect car VIN number.

【Wide Vehicle Coverage+9 Languages Supported】LAUNCH CRP909E automotive car scanner can work on over 57 car brands,over 10000+ cars in the world,including Asian, European, American, Australian, Malaysia, Japan, Korea, Russia car brands.This scanner compatible with OBDII,EOBD and JOBD protocols and also supports cars which made in 2018/2019/2020/2021.Can work on 12V passenger cars,pickup and light trucks.9 kinds of languages:Spanish, Portuguese, English, Russian, German, Italian, Korean, French, Japanese.

LAUNCH CRP919E is with Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators, like EVAP test, Cylinder Deactivation, Cycling A/C Clutch On/Off, switch fuel injector on/off, cycling ABS motor pump, test car window, door, sunroof, wipers and etc to pinpoint fault locations easily and effectively.

LAUNCH CRP919E is with Auto Vin function to easily read the vehicle identification number.

Once this diagnostic tool and the given car are properly connected, D7 perform a comprehensive scan of all available systems of your vehicle. With only one click, you can scan your car’s detailed version information, also all diagnostic trouble codes and live data stream of full electrical control units. If needed, you can only view the diagnostic information of the selected systems in the forms of checks.Once this diagnostic tool and the given car are properly connected, D7 perform a comprehensive scan of all available systems of your vehicle. With only one click, you can scan your car’s detailed version information, also all diagnostic trouble codes and live data stream of full electrical control units. If needed, you can only view the diagnostic information of the selected systems in the forms of checks.

Work for Can FD Compatibel Vehicles

It is mainly for the detection of license plates of CAN FD communication protocols such as GM, Jaguar, and Land Rover (reading fault codes, data streams and other special functions).

1. Steering Angle Reset

Reset the steering angle to zero to keep the car running straight.

2. Injector Coding

Write the new injector code into the car system for the correct cylinder injection quantity.

3. IMMO M

Disable any lost keys and add new keys. **ONLY for cars with an easy IMMO system.

4. DPF Regeneration

Especially works for D-P-F system with D-P-F regeneration, D-P-F component replacement teach-in and D-P-F teach-in after replacing the engine control unit.

5. A/C relearn

The vehicle air conditioner replaces the electronic control unit, replaces the actuator or the memory of the electronic control unit memory is lost, and requires air conditioning initialization learning.

6. ABS Bleeding

Help exhaust the air after repair the ABS pump system.

7. AdBlue Reset

Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

8. Throttle Matching

Initialize the throttle actuators to the default state.

9. TPMS Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Tire Reset

Set the size parameters of the modified or replaced tire.

11. AFS Headlamp Reset

Initialize the adaptive headlamp system.

12. Sunroof Initialization

Initialize the sunroof when locked off or closed.

13. Battery Reset

Register the battery after replacement.

14. Seat Calibration

Calibrate the memory in replaced or repaired seats.

15. Oil Reset

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

16. A/F Reset:

Set or learn Air/Fuel ratio parameters.

17. GEARBOX LEARN

Help complete the gearbox self-learning to improve gear shifting quality.

18. Transport Mode

Deactivate the transport mode.

19. Windows Calibration

Perform door window matching to recover ECU initial memory.

20. Language Change

Change vehicle system language.

21. Suspension Reset

Adjust the vehicle body height sensor for level calibration.

22. NOx Sensor Reset

Reset catalytic converter learned value stored in ECU.

23. Stop/Start Reset:

Set up the automatic start-stop function in ECU.

24. Coolant Bleeding

Activate the electronic water pump.

25. Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

26.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

27. RESET EGR

28. RESET HVOLBAT

29. RESET ENGPBM

...

The diagnostic tool is ingeniously designed to troubleshoot all systems, for most of the major vehicles on the road today:

Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.

Read & erase DTCs to locate problem areas and clear the codes.

View Live Data of each parameter item.

With it, you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, etc., and save you the hassle of diagnosing any un-identified car errors you’d ever met.

All Controlled Modules Scanning and Problem Diagnostics, such as Engine System, Airbags System, ABS System, Transmission System, Brake System, Alarm System, Keyless Entry System, TPMS System, Steering System, Wheel System, Fuel System, etc.

01 - Request Current Powertrain Diagnostic Data

02 - Request Powertrain Freeze Frame Data

03 - Request Emission-Related Diagnostic Trouble Codes

04 - Clear/Reset Emission-Related Diagnostic Information

05 - Request Oxygen Sensor Monitoring Test Results

06 - Request On-Board Monitoring Test Results for Specific Monitored Systems

07 - Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle

08 - Request Control of On-Board System Test or Component

09 - Request Vehicle Information

0A - Request Emission-Related Diagnostic Trouble Codes with Permanent Status

LCD: 7 inch touchscreen and Keyput

System : Android 7.1

Storage Temperature: -20 °C ~ 70°C

OBD II Interface Input Voltage: 9V-18V

Operating Temperature: -10 °C ~ 50°C

Dimension: 246X139.5X34mm

Battery: Built-in 6000 mAh Lithium Battery

Larger Memory Scanner with 2GB RAM & 16GB ROM

1pc x CRP919E tablet

1pc x USB cable

1pc x OBD main cable

Tags: LAUNCH X431, LAUNCH , LAUNCH CRP919E , CRP919E , LAUNCH CRP 919E , LAUNCH CRP919 E

Prev: Diagzone Subscription Activation Renew for Thinkdiag Old Boot Thinkdiag2 and Golo Pro Passenger+Electric+Heavy cars

Next: OBDEMOTO 900PRO 3-in-1 Motorcycle Scanner For BMW/ Harley Davidson/ Ducati Support Diagnosis + Key Matching + ODO Mileage Adjustment