USB V-CAN3 Automotive CAN Network Test Equipment Connecting PC and CAN Network Self Powered from USB

USB V-CAN3 is a convenient tool for connecting PC and CAN network with high performance and high quality. It is fully isolated from the PC and includes certified drivers for Windows XP, Vista, 7, 8, X, 10 and Linux. Moreover, USB V-CAN 3’s isolation layer is self powered from USB, which does NOT need external power for the CAN transceiver.

USB V-CAN3 is used for the development of automobile ECU and automobile inspection products, the modification and testing of automobiles, which makes it a perfect choice for automobile OEMs, automobile parts companies, and R&D and production companies of automobile diagnostic products.

ValueCAN3 is a high quality CAN tool. ValueCAN3 is completely isolated from the PC and can be used to work under Windows XP and newer Windows drivers. The isolated physical layer of the ValueCAN3 is powered via USB, so no external power supply is required for CAN transceiver operation.

The isolation of the ValueCAN3 is uncommon on low-cost interfaces, the isolation design protects the PC and its communications from ground or noise, and the robust electrical characteristics withstand harsh environments, including residual and transient voltages. The pin definitions marked on the housing make it easier for the users to wire.

With the ValueCAN3 it is possible to run the network at a high load rate of 1 Mbit per second. The Value Can3 operates on high-speed CAN networks, including 100% utilization at 1Mbit baud rate on both channels, thanks to a 1Mb buffer on the device.

ValueCAN3 supports loading scripts created by Vehicle Spy Professional, which run in real-time with microsecond precision, which can be controlled or monitored by a PC application.

ISO11898 dual wire CAN Physical Layer (TJA1040x2) compatible with Device Net and CAN open

J2534 Compliant for CAN and ISO15765

RP1210 Compliant for CAN and J1939

CCP protocol hardware acceleration

Supports listen-only operations

Double-buffered CAN transmission

Industry-standard 9-pin D-sub connector pinout

Integrated 1 meter USB cable

Transient and reverse battery protected

Green and red LEDs indicate transmission or reception of USB data

LED indicates transceiver power

Operating temperature range: -40° C to +70°C

Fully USB-powered with option for external power

Input from 9-26V DC; compatible with 24V industrial systems

Isolated transceiver side

Power Consumption: 15mA @ 14.4 VDC (typical); 100mA @ 14.4 VDC (maximum during bus fault)

On board Processing: 40 MIPS RISC-based design

64-bit time stamping to an accuracy of 0.5 microseconds for one channel or 5 microseconds for two channels; timestamp never overflows

Windows XP / Vista / 7 / 8.X / 10 and Linux drivers

Field-upgradeable flash firmware

Vehicle Spy included for baud rate setup

Graphical Bit Timing Tool

Hardware:
Supports 2-way CAN acquisition simultaneously

Package Includes:

1pc x USB V-CAN3