S6 Bluetooth OBD2 Scanner with Auto VIN reading allows users to diagnose all equipped electronic control modules with one click. You can use it read/clear fault codes, reading ECU information, and displaying combined live data from all diagnosed electronic modules.

S6 diagnostic tool offers car owners and and technicians an easy and affordable solution to pinpoint problems with engine, TCM, ABS, SRS, IMMO, Windows, Seats, Audio, TPMS, etc..

Autoauth for FCA SGW (Need to pay extra)

Use the latest software update function AutoAuth to provide diagnosis, active testing, etc. making the diagnostics more secure. Applicable to FCA vehicles (for Chrysler, for Dodge, for Fiat, etc. after 2017) equipped with a security gateway module (SGW).

Steps:

1. The manufacturer chooses "THINKCAR" because KINGBOLEN S6 is manufactured by THINKCAR factory

2. Select "THINKTOOL Others" for Tool model

18 Languages supported

English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Hungarian, Persian, Greek, Slovak, Dutch, Korean, Arabic, Traditional Chinese

*Before using it, please upgrade the device first

Powerful All System Diagnostic Code Reader

(Great for car repair shops and mechanics to improve business)
engines/ Auto Transmission/ Airbags/ IMMObilizer/ Key Coding/ ABS/ Cruise Control/ Instruments/ Self Leveling Suspension systems/ Seats/ Doors/ Gateway/ Steering Angle/ Air Suspension/ Body Systems/ Electronic Power Steering & Motor Assisted/ Power Steering/ Tyre Pressure/ Rain Sensors/ 4WD System/ Stabilizer/ Intelligent Parking Assist/ Door Motors/ Audio Systems/ Air Conditioning/ Tiptronic/ Anti Theft/ Soft Top/ Headlamp Leveling/ Central Locking/ Automatic Clutch/ DPF Reset/ Electric Windows/ Plip Programming/ Heated Rear Window/ Xenon Headlights/ Wash Wipe/ Fuel Burning Heater/ Transfer Box/ Seat Memory/ Oil Life Service Reset/ Sliding Doors/ Electronic Throttle/ Navigation System/ Rollover Sensor/ Cruise Control/ Multi Function Steering Wheel/ Aux Heating/ Electronic Parking Brake/ Clutch Electronics etc.


It supports the detailed Function :
-- Read fault codes: read and decode the DTCs to identify where the fault location is;
-- Clear fault codes: erase the DTCs to turn off the MIL after repairs;
--retrieve ecu information: allows you to retrieve vehicle information;
-- Graph live data stream: view the dynamic data stream to determine vehicle condition

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

KINGBOLEN S6 has 28 service functions which allows you to reset various systems in your vehicle. support more function than other scanners priced similarly

Please note: Not all reset features are supported on all models

If you have any doubts, please send us your model, year and the reset function you want to know, and we will check it for you. Thank you.

1. SAS - Steering Angle Reset

To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.

2. Brake Reset

lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.

3. Gear Learning

The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336' gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.

4. Oil Reset

The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.

5. IMMO Service

To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECu, BCM, or remote control battery is replaced, anti-theft key matching must be performed.

6. Injector Coding

Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.

7. TPMS Reset

After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

8. Battery Matching

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

9. ABS Bleeding

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

10. Elec.Throttle Adaption

Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume.

11. DPF Regeneration

DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.

12. Suspension Matching

This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.

13. AFS Reset

This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

14. Sunroof Initialization

This function can set the sunroof lock off, closed when it rains, sliding/tilting sunroof memory function,temperature threshold outside the car etc.

15. A/ T Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

16. EGR Adaption

This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

17. Language Change

This function is used to change the system language of the vehicle central control panel.

18. A/F Reset

This function is applied to set or learn Air/ Fuel ratio parameters.

19. Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

20. NOx Sensor Reset

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine ECu.

21. Seats Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

22. Stop/ Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function inECU(provided that the vehicle has a hidden function and supported by hardware).

23. Transport Mode

ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.

24. Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.

25. Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window.

26. AdBlue Rest (Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.

27. ODO Reset

a) ODo reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a cardiagnostic computer and data cable, so that the odometer shows the actual mileage.

b) Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.

28. Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.

Full OBD Function Lifetime Free

1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

4 in 1 Live Data Stream, Find problem more Accurately

The data are presented in a highly understandable way.

The car scan will show you real-time data in text and graphics such as engine speed, engine coolant temperature, fuel system status, short-term fuel trim & more.

View the dynamic data stream to determine vehicle condition. Most car scanners only allow you to view two data streams in one graph. However, this KINGBOLEN S6 auto diagnostic scanner will display and combine 4 data streams in one graph, such as "Engine RPM", "Vehicle Speed", "Engine Coolant Temperature" and "Absolute Throttle Position", providing an intuitive presentation.

Intelligent Auto VIN+ Wireless Connection

KINGBOLEN S6 automotive scanning tool designed advanced AUTO-VIN function which identifies your car's info like year/ manufacture/ model/ VIN of most models automatically and quickly, it leads you enter the vehicle diagnostic menu in a convenient way.

Via Bluetooth Wireless Connection

KINGBOLEN S6 is a Bluetooth OBD2 diagnostic tool, which has 10 meters diagnosis range, you can operate the scanner in a comfortable place and position.

Maintenance report Email sharing and Printer

You can share your diagnostic report anytime, anywhere.

DTC Lookup & Google Chrome Query DTC

KINGBOLEN S6 has a separate DTC database, which supports the independent fault code query function. At the same time, the device has a "Google Chrome" browser. If you encounter an unclear DTC code, it is convenient to query the DTC.

Other Function of KINGBOLEN S6

* Maintenance report
* screenshot
* Email sharing
* TPMS extension (paid, need to buy THINKCAR TPMS G1/G2)
* Data recording and playback
* Voltage monitoring
* Repair shop information settings
* Fault code library

Lifetime Free One-click Update via WiFi

You will never need to worry about your OBDII scan tool KINGBOLEN S6 would become outdated because it supports lifetime free updates：because it supports lifetime free update, to give more features you may enjoy more features, newer vehicles, and better performance. Unlike the tedious upgrade steps that require a computer connection, the scanner S6 supports a one-click upgrade. Tap "Upgrade", select software, tap "Update" to start downloading software, and then they will be installed automatically.

Advanced Hardware of KINGBOLEN S6

* Tablet size: 5.99 inches, 1280*800
* System version: Android 10
* CPU version: 4-core 1.8 GHz
* RAM memory: 2GB
* Storage memory: 32GB (system displays 32GB)
* Battery capacity: 3.7V/3150mAh,
* Camera: Not supported
* Wifi network: 2.4GHz, 5.0Ghz dual frequency

Packing List of KINGBOLEN S6

1PC * KINGBOLEN S6 Host
1PC * EVG Storage Bag
1PC * VCI Dongle
1PC * Charging cable
1Pc * User Manual (multi-language）