2024 LAUNCH Creader Elite 2.0 FGC Full System Diagnostic Bi-Directional Scan Scanner for Ford/ GM/ Buick/ Cadillac/ Chevrolet/ Chrysler/ Dodge/ Jeep

launch Creader Elite 2.0 FGC Full System Diagnostic Bi-Directional Scan Scanner for FORD GM Chrysler

for Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford of Europe, FORD, GM, JEEP, Lincoln, Mazda, GMC, Alpheon, Ravon, Pontiac, Saturn, Hummer, Oldsmobile, Holden, Daewoo, Workhorse cars (1996-2024) to read/ clear codes, read ECU info, view Live Data, do active tests, perform special functions and etc. For all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems. Smoother, Faster, More Accurate, Pinpoint System Faults in seconds.

launch Creader Elite 2.0 FGC Features:

1. Perform All Free Functions same as launch X431 series and OEM Tools, including Setup Sensing And Diagnostic Module (SDM) Part Number, D.P. F Regen, Cylinder Power Balance, Compression Test, Oil Reset, Battery Registration, Idle Relearn, etc. Get All Free Special Functions from "1.Diagnose" > "2.Manual Choose Model&Year" > "3.Automatically Search" >"4.System Selection" >"5.Manual Choose Module"> 6."Special Function".
2. Powerful Bidirectional Control(Active Tests): Request information or command a actuator to perform specific tests, such as cycling the a/c clutch on/off, EVAP test, Fuel Pump test and more to solve the specific repairing work.
3. Factory-Level Full Systems Diagnosis: One touch to Auto Scan all available systems to read/clear fault codes, view data stream, freeze-frame, retrieves module info, etc. Detailed diagnostic reports help you to quickly pinpoint problems.
4. Lifetime Free WIFI Updates: One-Click WIFI free update to get the newest software. Don't need any SD cards, cables or PC, high update frequency monthly, Save hundreds bucks subscription fee for every years.
5. Full OBD2 Functions for All Cars: Read/Clear Codes, turns off MILs, I/M readiness, On-Board Monitor(MODE 6), EVAP System(Mode 8), etc. Help you pass emissions tests without going to repair shop.
6. More Cost Effective Features: AUTO VIN to quick identify vehicle VIN and do a comprehensive diagnostic(Suits for Vehicles after 2006). 4-IN-1 Live Data to show the live vehicle conditions in text and graph to help you to analyze the abnormal parameter easily. Email Share & Print Diagnostic Report; Online Feed-back; Data Record, Replay & Screenshot; Real-time Battery Voltage to judge the state of battery. Built-in DTC Library & Code Reach from Google.
7. Mall Service: Allows you to purchase other more car brand software in the Mall.



OE-Level ALL System Scan, All-Around & In-Depth Diagnosis Fit For Your FORD/GM/Chrysler Cars Brand

When a thorough diagnosis is your aim – spanning battery, steering, suspension, audio, or headlamp systems, etc. – LAUNCH X431 Elite 2.0 Pro for FGC Car brands professional scanner emerges as the ultimate choice. Perform same as LAUNCH X431 Series, but more cost-effective. It can compatible with Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford of Europe, FORD, GM, JEEP, Lincoln, Mazda, GMC, Alpheon, Ravon, Pontiac, Saturn, Hummer, Oldsmobile, Holden, Daewoo, Workhorse cars (1996-2024) to read/ clear codes, read ECU info., view Live Data, do active tests, perform special functions and etc. For all available systems, providing you with a Dealership-Level diagnosis, getting the accurate and in-depth diagnosis across all automotive systems. Smoother, Faster, More Accurate, Pinpoint System Faults in seconds.

1. ECU Information Retrieval: Access control unit details like unit type, version numbers, and more, offering crucial references for repair work.
2. Read/ Clear DTCs: Read fault codes to locate problems and clear the codes after certain repairs.
3. 4-in-1 Live Data Stream Insights: Visualize sensor data through Live Data streams and graphs, recording and replaying data stream, including common values like Transmission Temperature and Misfire.
4. Freeze Frame Analysis: Capture a snapshot of current sensor values during issues like engine misfires, aiding in diagnostics.
5. DTC Help & Repair Tips ,Compared to ONLY providing simple DTC definition of other scanner ,LAUNCH X431 FGC 2.0 Scanner provides comprehensive repair support by offering detailed explanations, probable causes, and troubleshooting guidance for each Diagnostic Trouble Code (DTC) that is generated during a scan. This additional information assists you in identifying the root causes of issues and allows for more accurate and efficient diagnosis.
6. One to One Online Feedback- In-Time Problem Solving, LAUNCH X431 Scanner for FORD,GM,Chrysler provides you with a Feedback function to share any problems you encounter in the process of diagnosis. We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience.
7. Google Online Code Search allows you to connect with Google browswer for massive online code information,Help you to eliminate Guesswork and Get Directly to the Fix Quickly.
8. Active Tests/Bi-directional Control: Perform Active Tests/Bi-directional Control to accurately figure out the work status of modules.
9. Special Function: Conduct diverse daily automotive maintenance functions on specific systems, enhancing overall vehicle health.

LAUNCH X431 Elite fit for Ford/GM/Chrysler automotive scanner can scan 120+ modules same LAUNCH X431 Series like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic system




LAUNCH Creader Elite 2.0 for FGC with ALL Free Services
Adaptation + Calibration + Customization+ Initialization + Personalization + Relearn + Matching + Reset

Q : WHY CAN'T SEE ANY RESETS on my scanner, as its advertised all free service functions.
A : All free resets are in the related systems. For example, to connect 2014 Chevy Silverado, the way to use TCM‘s special functions should go to Diagnose>Manual Choose Model&Year>Automatically Search>System Selection> Transmission Control Module (TCM) > Special Functions, then you will be able to see the list of special functions supported by this system, There are more than 100 types of special functions for all systems combined. *Note: Special functions vary by vehicle model and year.

Notice: DON'T Purchase Any Special Functions in the "MALL", which are available for all compatible car brands other than for GM.

Brake Reset: After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
Oil Reset: Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
SAS Reset: Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
Battery Matching: Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
ABS Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
SUS Reset : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
TPMS Reset: When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.
GEAR Reset: The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
Injector Reset (Injector Coding): The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
AFS Reset: It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
Throttle Adaptation: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
AC System Relearn, 13. E.GR Adaption, 14. ADBlue Reset, 15. Air Level Calibration, 16. Crank/Cam Position Sensor Adaptive Learning, 17. D.PF Regeneration, 18. G.PF Regeneration, 19. Gearbox Relearn, 20. HV Battery Diagnostics, 21. NOX Sensor Reset, 22. Intelligent Cruise Control System, 23. Language Change, 24. Motor Angle Calibration, 25. Seat Occupancy Calibration, 26. Stop/Start Reset, 27. Sunroof Reset, 28. Tire Reset, 29. Transport Mode, 30. Windows Calibration, 31. Clutch Matching, 32. Turbocharging Matching, 33. Gateway Module Data Calibration, 34. ECU Reset, 35. Rainfall Light Sensor 37. CAS Reset, 38. ALBBF initialization, 39. Actuator Recalibration, 40. HVAC Control Module Calibrate, 41. Engine Speed Control, 42. Fuel Trim Reset(Alcohol Content Reset), 43. Fuel Trim Enable, 44. Hybrid Control Compression Test, 45. Cylinder Power Balance, 46. Fuel Injector Balance, 47. Crankshaft Sensors Relearn, 48. Idle learn Reset, 49. VGT Turbo Calibration, 50. Zero Point Calibration, 51. VIN Registration(Write), 52. ABS Initialization, 53. Headlamp, 54. Coolant Bleeding, etc. More Features Keep Growing...

Note: All special features are free, no need to buy any special features in the mall. Special features are placed in the diagnostics screen, here is the path to find all free features：Select Diagnose > Select Car Model, Year > Run Autovin > Select Module > Special Functions!



LAUNCH Creader Elite 2.0 for OBD2 scanner for engine system with full functions of OBD2.

Data Stream View: Live data are displayed in a time-based chart to help customers to better analyze the abnormal parameter. This function will let you see engine performance information, if there are any trouble codes or issues with your engine or ECU.
Freeze Frame Data Viewing: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. It intended to provide you with a guide as to where a fault might be occurring within a vehicle.
O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.Accurately identifies failures of oxygen sensor and vehicle emissions related errors.
I/M Readiness Check: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing, which is convenient to determine the vehicle’s condition.This function can help you pass SMOG TEST.
On-board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Which is a way to find out if the engine has any misfire or compression problems on a particular cylinder, or other data that might indicate a problem but isn’t severe enough to trigger a check engine light.
EVAP System Test: Lets you initiate a leak test for the vehicle's EVAP system, that prevents fuel from evaporating out of your tank and contributing to smog. After fixed a problem with the fuel system,you can verify your fix right away, without waiting a few days (or longer) for your car to run it automatically.
DTC Loookup: with built-in DTC library, clicking on the error code directly for definition, displaying the error code and its meaning, saving time for you to looking for the meaning of DTC on the internet.



Solve All Problems,Cover 99% Functions of Cars! Compatible with Ford / GM / Chrysler /Buick/ Cadillac/ Chevrolet/ Dodge/JEEP,/Lincoln/Mazda

When choosing an car scanner diagnostic for all cars, one of the most important considerations is how compatible it is with different vehicles. This LAUNCH diagnostic tool has expend vehicle coverage, being well-matched with Ford / GM / Chrysler /Buick/ Cadillac/ Chevrolet/ Dodge / JEEP /Lincoln/Mazda till 2024

LAUNCH Creader Elite 2.0 FOR FORD/GM/CHRYSLER - WIDE VEHIVLE COVERAGE WITH NO IP LIMITED!



Free Supporte 3 Vehicle Brands

Compatible with 99% vehicles of Ford, GM, Chrysler from 1996-2024, including 12V cars, light duty trucks, SUVs, hybrid vehicles, minivans, no IP limited.

Autoauth for FCA SGW

Use the latest software update function AutoAuth to provide systems diagnosis, active test, retrieve module info, ecu coding, etc., making the diagnostics more secure. Applicable to FCA vehicles(Chrysler, Dodge, Jeep, Fiat) equipped with a security gateway module (SGW) in 2017 and later. (Note: There is an annual 50 bucks fee for AutoAuth account, but the payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process.)
> Fit for FCA Vehicles from 2017-2024 including 300/Pacifica/Challenger/Charger/Durango/Journey/Ram 1000/Ram 1500(DS)/Ram 1500(DT)/Ram 2500/Ram 3500 Cab Chassis/Ram 3500 Cab Chassis 10K/Ram 3500 Pickup/Ram 4500/Ram 5500/ProMaster City/Cherokee/Compass/Compass (Brazil, China, India, Mexico)/Grand Commander/Renegade/Wrangler (JL)/Giulia/Giulietta/Stelvio/500X/500X/500BEV/Toro/Doblo/Ducato/Novo Strada/Mobi/... More keeps growing

PMI Function

PMI Function For Ford/Lincoln/Mazda, etc. When you replace or initialize a new/used module for Ford/Lincoln/Mazda, LAUNCH Creader Elite 2.0 for FGC scanner allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

11 Languages Optional

English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. Let you feel more comfortable with your native language, just switch back and forth as necessary without encountering any sort of language barrier.

One-Touch WIFI Wireless Update:

When the newer-version software is released, there will be a real-time notification upon the “Upgrade” icon in this obd2 scanner. With simple one touch, you’ll get this LAUNCH obd scanner updated for more powerful services, more supported vehicles, and more bug fixes. Don’t worry about the costs. There is no expiration date so you can save a lot of renewal fees. Just make sure you have a solid Wi-Fi connection for stable upgrading.

MALL Service

If you want to access to other more car brand, you can purchase the brand software in the Mall.

*Note: NO Need to purchase the Special Functions in the Mall.

Package List:

1 pc x LAUNCH Creader Elite 2.0 FGC